Summary of HDS 796 CW
Page 1
Hds 796 cw www.Karcher.Com 5.959 - 421 (09/99) 1.173....
Page 2
Hds 796 cw 1 2 3 4 5 6 7 8 9 10 11 12.
Page 3
Hds 796 cw operating instructions 3 spare parts list 14 prior to initial startup, operating manual and safety instructions no. 5.951-949 must be consulted.
Page 4
English hds 796 cw 3 contents important safety instructions 4 environmental protection 4 overview 5 commissioning 5 checking oil level 5 filling with fuel 5 fill with cleaning agent 5 mounting handgun 5 water connection 5 drawing in water from tank 6 mains connection 6 operation 6 switching on unit ...
Page 5
English hds 796 cw 4 important safety instructions warning when using this product basic precautions should always be followed, including the following: * do not use with flammable liquids and toxic chemicals. * injecation hazard: equipment can cause seriouse injury if the spray penetrates the skin....
Page 6
English hds 796 cw 5 overview fig. 1 1 swivel caster with parking brake 2 connection for high-pressure hose 3 fuel tank inlet 4 high-pressure hose 5 cover latch 6 handgun 7 pressure gauge 8 filler opening for cleaning agent and metering equipment 9 water connection 1 with strainer fig. 2 1 selector ...
Page 7
English hds 796 cw 6 drawing in water from tank the following conversion work is necessary if water is to be drawn in from an external tank. Lift off scale inhibitor reservoir. Remove upper supply hose to water reservoir and route to pump head. Detach water connection at pump head and swivel aside. ...
Page 8
English hds 796 cw 7 intended use cleaning of: machines, vehicles, structures, tools, facades, terraces, garden implements, etc. * engine cleaning is only to be performed in areas provided with oil separator. * heed appropriate safety regulations for use at petrol stations or in other hazardous envi...
Page 9
English hds 796 cw 8 frost protection the unit has a frost protection feature, which avoids freezing of the watersystem down to -30 °c. The frost protection will be activated as follows. 1. Unscrew the water inlet hose of the unit. (fig.1) 2. Unscrew the high pressure hose with handgun, store in fre...
Page 10
English hds 796 cw 9 clean strainer in low water protection – unfasten union nut and detach hose – take out strainer if necessary, screw in bolt m8 approx. 5mm to pull out strainer. – clean strainer in water – slide in strainer – mount hose – tighten union nut clean filter at cleaning-agent suction ...
Page 11
English hds 796 cw 10 faults fault fuel indicator lamp on ready for operation indicator lamp off unit does not run unit does not build up pressure cause – fuel tank empty – motor overloaded/overheated – no mains voltage – air in system – pressure set to min – strainer in water connection dirty – ins...
Page 12
English hds 796 cw 11 fault unit leaking, water dripping out at bottom unit constantly switched on and off with handgun closed unit does not draw in cleaning agent burner not ignited set temperature not attained when working with hot water cause – pump leaking – leak in high-pressure system – filter...
Page 13
English hds 796 cw 12 warranty the warranty terms and conditions issued by our responsible sales company apply in every country. Within the warranty period, any faults in the unit will be rectified free of charge provided that the problem was caused by a material defect or manufacturing error. The w...
Page 14
English hds 796 cw 13 technical data type hds 796 cw-50 (1.173-114) hds 796 cw-60 (1.173-115) mains connection 200 v 3~ 50 hz 120 v 1~ 60hz connected load 3.0 kw 3.1 hp engine output 2.2 kw fuse (slow blow) 13 a 20 a water connection supply temperature max. 30 °c max. 30 °c supply volume min. 900 l/...
Page 15
Hds 796 cw 14.