Karcher K 2.19 Operator's Manual - Working With Detergents
English
9
Detergents can only be applied at low
pressure (Min.).
Î
STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
Î
STEP 2:
Fill a container with Kärcher deter-
gent. Place the filter end of detergent
suction tube into the container.
Î
STEP 3:
Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
Î
STEP 4:
Cleaning up
: Always draw fresh wa-
ter through the detergent suction
tube when the cleaning job is done,
to flush any remaining detergents
from the injection system.
For best results see Cleaning Tips for
specific information on how to clean
different surfaces.
Always Use Kärcher
®
Detergent for
Best Results
Kärcher
®
biodegradable detergents are
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won’t clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
life. For Kärcher
®
Detergents, check
your retailer or visit our website:
www.buykarcher.com
The following Kärcher SoapPac de-
tergents are available:
Vehicle Wash & Wax Cleaner
All Purpose Cleaner
Deck & Patio Cleaner
Degreaser
Exterior House Cleaner
CAUTION
Never use
:
–
Bleach, Chlorine products and other
corrosive chemicals
–
Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
–
Tri-sodium phosphate products
–
Ammonia products
–
Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.