1. DL manuals
  2. Karcher
  3. Pressure Washer
  4. K 2.35
  5. Operator's Manual

Karcher K 2.35 Operator's Manual

Other manuals for K 2.35: User Manual
Manual is about: Karcher K 2.35 Pressure Washers: User Guide

Summary of K 2.35

  • Page 1

    High pressure washer operator manual overview ........................................................................ 2 precautions ................................................................ 2-4 assembly instructions ................................................... 4 operating instructions...

  • Page 2: Never!

    2 overview high pressure washer never point nozzle at people or animals. Never drink alcohol or use drugs while operating this equipment. Never operate while standing in water. Never touch plug with wet hands. Never let electrical connections rest in water. Never operate pressure washer without the ...

  • Page 3

    3 important precautions – read first! Grounding instructions this product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment groundi...

  • Page 4: Assembly Instructions

    4 important precautions – continued assembly instructions • never use the pressure washer to draw in water contaminated with solvents, e.G. Paint thinners, gasoline, oil, etc. Note: dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter. • always prevent...

  • Page 5: Operating Instructions

    5 operating instructions step 1 connect the high pressure hose to the unit’s high pressure outlet. Step 2 insert the high/low pressure nozzle into the trigger gun. Press in against the spring tension and twist into the locked position. Step 3 connect garden hose to unit’s water inlet. Step 4 connect...

  • Page 6: Using The Accessories

    6 using the accessories vario power nozzle wash brush warning to avoid serious injury, never point spray nozzle at yourself, other persons or animals this nozzle features two positions. The high setting provides a steady powerful 25° high pressure spray pattern, for general cleaning. The low setting...

  • Page 7: Working With Detergents

    7 working with detergents kärcher pressure washers operate at two pressures. The high pressure is used for cleaning, you cannot apply detergents when working at high pressure. To apply detergents you must be operating at low pressure. Step 3 turn on the pressure washer. Pull trigger to operate unit:...

  • Page 8: Shutting Down & Clean-Up

    8 shutting down & clean-up taking a break... Five minutes or more step 1 remove detergent suction tube from jug and insert into 1 gallon (5 l) of fresh water. Siphon water at low pressure for one minute. Step 2 turn the switch to off (0) position and unplug cord from outlet. Step 3 turn off the wate...

  • Page 9: Cleaning Tips

    9 1. Disconnect all water connections. 2. Turn on the machine for a few seconds, until the water which had remained in the pump exits. Turn off immediately. 3. Do not allow high pressure hose to become kinked. 4. Store the machine and accessories in a room which does not reach freezing temperatures....

  • Page 10: Cleaning Tips – Continued

    10 cleaning tips – continued kärcher canada inc. Warrants to the original owner that this product shall be free from defects in material and workmanship for two years from the date of its original purchase. If such a defect appears during the warranty period, upon presentation of proof of purchase, ...

  • Page 11: Troubleshooting

    11 troubleshooting disconnect the machine from the power source before making any repairs. Symptom motor will not start. Unit does not reach high pressure. Output pressure varies high and low. Cause on/off switch is in the “off” (o) position. Power cord is not plugged in. Extension cord is too long....

  • Page 12

    12 troubleshooting – continued solution dilute detergent. Run warm water through filter to remove debris. Remove obstruction or replace detergent suction tube. Turn nozzle tip to low pressure position. Blow out or remove debris with a fine needle. Tighten fittings. Insert new washer. Insert the high...