Karcher K 2.360 Operator's Manual - Assembly Instructions

6 English

STEP 1:

Insert wheels into the body of the unit.

STEP 2:

Slide the transport handle into place.

STEP 3:

Attach the accessories holder.

STEP 4:

Install the supplied connector to the 

unit’s water inlet.

Note: Never attach the garden hose 

connector to the unit’s water inlet!

STEP 5:

Fasten the quick connect to the high 

pressure outlet.

STEP 6:

Insert one end of the high pressure 

hose into the trigger gun until it locks 

audibly.

Note: Make sure the connection nip-

ple is aligned correctly. Check the 

connection by pulling on the high 

pressure hose.

Check the secure connection by pull-

ing on the high pressure hose.

Disconnect:

Press the disconnect key on the trig-

ger gun and remove the high pres-

sure hose from the trigger gun.

ASSEMBLY INSTRUCTIONS