Karcher KA 5300 User Manual - page 25
EN | 25
EN
in the CD changer:
1.
Set the unit into CD mode.
2.
Press the MEM/CLK-ADJ button.
3.
Press the
button to select the desired disc.
4.
Using the SKIP-
and SKIP+
buttons, select the track to be played first in the sequence.
5.
Press the MEM/CLK-ADJ button again to store the track in the memory.
6.
Repeat the steps 3 - 5 to select up to 60 tracks for your sequence.
7.
Press the PLAY/PAUSE button to start the playback of your sequence.
8.
To stop playback press the STOP
■ button once. Press it twice to delete the program sequence.
Cassette
General Operation
Key
Function
STOP/EJECT
Press to stop all deck operations. Press again to open the cassette door.
FAST FORWARD &
FAST REWIND
Press to start rapid tape winding in either forward or reverse direction.
Press STOP/EJECT key when the cassette spool stops turning.
PLAY
Press to start playback of a tape.
PAUSE
Press to pause playback. Press again to resume playback.
RECORD (deck 1 only)
Press together with PLAY key to start tape recording.
Playback
1.
Set the unit into tape mode by pressing the TAPE button.
2.
Put a cassette tape into one of the cassette decks.
3.
Press the PLAY key to start playback.
4.
Adjust the volume to a desired level.
5.
To pause playback press the PAUSE key. Press it again to resume playback.
6.
To stop playback press the STOP/EJECT key.
Recording
A. Recording from tape (deck 2 to deck 1)
You can duplicate a pre-recorded tape to another tape (deck 2 (playback) to deck 1 (recording)):
Dubbing at normal speed:
1.
Set the unit into tape mode by pressing the TAPE button.
2.
Insert a pre-recorded cassette into deck 2 and a blank cassette tape into deck 1.
3.
Press the PAUSE key and then the RECORD and PLAY keys at deck 1.
4.
Press the PLAY key at deck 2 to start playback and press the PAUSE key at deck 1 to start dub-
bing.
5.
When finished press PAUSE key at deck 1 and STOP key at deck 2.
Dubbing at high speed:
This unit is equipped with a high speed dubbing system which can save the time for dubbing by 2/3
compared to normal speed:
•
Press the DUBBING button to “HI” position and then follow the same procedure as described
above under “Dubbing at normal speed”.
•
When dubbing a pre-recorded cassette tape at high speed a chattering sound is being heard. To
avoid this set the volume to a minimum level.
•
Do not switch between high speed dubbing and normal speed dubbing during the dubbing pro-
cess as this will vary the speed of the recording and may damage the cassette tape.
B. Recording from radio
1.
Set the unit into radio mode by pressing the TUNER button.
2.
Tune to the desired radio station and insert a blank cassette tape into deck 1.