Karcher MC 6430 User Manual - page 20
20 | EN
7.
On/Standby key
8.
Back / Tune Down key
9.
Next / Tune Up key
10. Stop / Band / Clock Set key
11. Play / Pause / FM Mode key
12. Function key
13. Volume Down (-) / Folder / Mem - key
14. Volume Up (+) / Folder / Mem + key
15. Remote Control Sensor
16. Speaker (right)
17. FM Antenna
18. Aux In socket
19. Headphone socket
20. Speaker output socket (left & right)
21. AC cord & plug
Remote Control
1.
On / Standby key
2.
EQ key
3.
Function key
4.
Back / Tune Down key
5.
Play / Pause / FM Mode key
6.
Next / Tune Up key
7.
ID3 / Sleep key
8.
Stop / Band / Clock Set key
9.
Volume Up (+) / Folder / Mem + key
10. Snooze / Timer key
11. Mem / Prog. / Play Mode key
12. Volume Down (-) / Folder / Mem - key
13. Battery compartment
First Installation
Connection of Speaker Boxes
•
Unwrap the speaker-cords of both speaker-boxes and insert the left/right plugs into sockets in the
rear of main unit.
•
Place the speaker boxes as far apart as possible for best sound effect.
Power Supply
•
Make sure the set voltage of the unit matches your local voltage.
•
Insert the plug of the AC cord into a wall outlet with AC power.
•
Press the On/Standby key to switch “on” the unit.
•
This unit is designed to operate without being totally powered “off”. It will either be “on” or in
“standby” mode.
•
In standby mode, the blue backlight of the digital display will be dimmed. But the display will show
the current time (clock function).
•
Anytime during standby mode, you can switch “on” the unit by pressing the On/Standby key
(on remote control or front panel of the main unit).
•
Save energy by switching the system to “standby” mode when not in use.
Note: How to tell if the power is “ON”?
When the power is “ON” the entire digital display will light up with a blue backlight.