Karcher NO-025 User Manual - page 10
10 | EN
LOCATION OF PARTS
1. Speaker
2. Band Selector
3. Tuning Knob
4. Volume/On/Off Knob
5. Tube Window
6. FM Antenna
7. Power Cord
8. Electron tube
9. Backlight indicator
RADIO OPERATION
1. POWER SOURCE - Plug the Power Cord (7) into a suitable outlet.
2. POWER ON/OFF - Keep the power on and rotate the volume and ON/OFF knob (4) clockwise.
The light of electron tube (8) will flicker ceaselessly when you listen to the radio.
3. THE ELECTRON TUBE - When the unit is on, the backlight (9) indicator will flicker ceaselessly,
then the electron tube (8) is warming up and the unit is starting up, it will take 10-20 seconds. You
will see the situation of backlight (9) indicator from the viewfinder. When the backlight (9) indica-
tor stops flickering and is bright smoothly, that means the electronic tube has finished warming
up, then the unit has started up and it can start working.
4. SELECTING BAND & STATION - Rotate the AM/FM switch knob (2) to AM or FM band. After
the band has been selected, you can tune the switch knob (3) to choose the program through the
pointer in the dial.
5. VOLUME SETTING - When the radio is working, rotate the volume knob clockwise to increase
the volume, while tune the volume knob counter-clockwise to decrease the volume. You can
rotate to your desired volume.
6. THE USE OF ANTENNA - You can rotate the unit position to get the clearest sound effect
through the built-in magnetism antenna when you listen to AM program; You can reposition the
FM antenna (10) and change its length and position to get the clearest sound effect when you
listen to FM program.
7. TO TURN THE RADIO OFF - Set the VOLUME (4) to Off.
O
N /OFF
AM FM
VOLUME
7
6
FM ANT
AC INPUT
230V~50Hz