Summary of NT 14/1
Page 1
English 5.906-492.0 rev. 00 (12/10) 1 nt 14/1 service manual.
Page 2
2 english 5.906-492.0 rev. 00 (12/10) 1 preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 hazard levels. . . . . . ....
Page 3
English 5.906-492.0 rev. 00 (12/10) 3 good service work requires extensive and practice- oriented training as well as well-structured training materials. Hence we offer regular basic and advanced training programmes covering the entire product range for all service engineers. In addition to this, we...
Page 4
4 english 5.906-492.0 rev. 00 (12/10) 1 flat fold filter 2 suction hose 3 cable hook, rotating 4 handle 5 suction head lock 6 impeller 7 chassis 8 filter dedusting 9 steering roller 10 dirt receptacle 11 suction support 12 chassis lock 13 floor nozzle 14 indicator lamp 15 socket 16 power switch 17 s...
Page 5
English 5.906-492.0 rev. 00 (12/10) 5 1 filter cover 2 suction head lock 3 dirt receptacle 4 impeller 5 guiding roll with fixed position brake 6 steering roller 7 suction support 8 suction head 9 power switch 10 carrying handle 4.2 nt 14/1 classic 4.2.1 front view.
Page 6
6 english 5.906-492.0 rev. 00 (12/10) 1 suction tube 550 mm 2 nameplate 3 exhaust filter 4 floor nozzle 5 power cord 6 pickup for floor nozzle 7 intake for suction pipe 8 suction tube 550 mm the type plate is located on the rear of the appliance. 4.2.2 rear view 4.2.3 type plate.
Page 7
English 5.906-492.0 rev. 00 (12/10) 7 1 chassis 2 chassis lock undo the lock (see arrow). Pull out the lock. Replace the lock. Replace the pressure spring if necessary. 1 dirt receptacle 2 bolt (electrically conductive) 3 suction support replace the suction support. 5 basic settings and service proc...
Page 8
8 english 5.906-492.0 rev. 00 (12/10) 1 support 2 fastening screws for cable intake 3 fastening screws for hood 4 fastening screw for carrying handle 5 carrying handle 6 hood 7 filter cover 8 device switch button unscrew the fastening screws for the carrying handle. Remove the carrying handle. Remov...
Page 9
English 5.906-492.0 rev. 00 (12/10) 9 1 exhaust filter 2 fastening screws for turbine housing 3 power cord 4 power switch 5 control chip 6 suction turbine 7 turbine casing 8 cord grip 1 fastening screw for socket casing remove the fastening screw for socket casing. 1 power cord 2 ferrit ring (anti-i...
Page 10
10 english 5.906-492.0 rev. 00 (12/10) 1 exhaust filter 2 fastening screws for turbine housing 3 power cord 4 ferrit ring (anti-interference ring) 5 power switch 6 control chip 7 suction turbine 8 turbine casing 9 cord grip 1 control chip 2 connecting cable, electrode overflow fuse 3 connecting cabl...
Page 11
English 5.906-492.0 rev. 00 (12/10) 11 1 power cord 2 ferrit ring (anti-interference ring) 3 power switch 4 cord grip remove the traction relief. Remove the mains cable from the cable guide. Pull the mains cable out of the appliance switch. Install the new mains cable in reverse sequence. 1 electrod...
Page 12
12 english 5.906-492.0 rev. 00 (12/10) unscrew the fastening screws for the turbine cas- ing. 1 top part of the turbine casing 2 sound proofing 3 connection plug of the turbine 4 suction turbine 5 bottom part of the turbine casing 6 air channel 7 seal disassemble turbine casing. Pull the connection ...
Page 13
English 5.906-492.0 rev. 00 (12/10) 13 몇 warning first remove the mains plug before doing any job on the vacuum cleaner. Open filter door. Replace the flat pleated filter. Close the filter door, it must lock into place. Release and remove the suction head. Clean the electrodes. Insert and lock the s...
Page 14
14 english 5.906-492.0 rev. 00 (12/10) the status of the attached circuit diagram represents the creation date of the service manual. This circuit diagram is not updated. When working on the device, please always use the current circuit diagram in kärcher-inside. There are no special tools necessary...
Page 15
English 5.906-492.0 rev. 00 (12/10) 15 9 circuit diagram 1 23456789 10 11 12 13 n l1 pe -ds1 pepepe fma 2031399 b 1 smd-w 5181379 slp 02 2009-12-01 b b1 ds1 m1 n1 s1 s2 x1 x2 elektroden saugturbine hauptschalter leuchtdiode steuerelektronik umschalter-betriebsart netzstecker steckdose te b1 ds1 m1 n...
Page 16
16 english 5.906-492.0 rev. 00 (12/10) 1 23456789 10 11 12 13 n l1 pe pepepepepepepepepe -ds1 fma 2031399 00 smd-w 5181379 slp 00 b1 ds1 m1 n1 s1 s2 x1 x2 elektroden saugturbine hauptschalter leuchtdiode steuerelektronik umschalter-betriebsart netzstecker steckdose te b1 ds1 m1 n1 s1 s2 x1 x2 electr...