Karcher NT 40/1 Tact Service Manual - page 12
12
English
5.906-513.0 Rev. 00 (12/10)
Remove the hood.
Pull the circuit board out toward the top.
Disconnect all connecting cables from the circuit
board.
Replace the circuit board.
Connect the new circuit board as per the circuit di-
agram.
Remove the hood.
Pull the circuit board out toward the top.
Disconnect all connecting cables from the circuit
board.
Replace the circuit board.
Connect the new circuit board as per the circuit di-
agram.
5.3
Replace the circuit board
5.3.1 NT 40/1 Tact
1
X10 Switch for filter shake off system
2
X9
Electrodes, overflow protection
3
X8
Electrodes, overflow protection
4
X7
Suction turbine
5
X6
Power switch
6
X5
Suction turbine
7
X4
Power switch
8
X3
Electric solenoid
9
X2
Electric solenoid
10
X1
Electric solenoid
5.3.2 NT 40/1 Tact Te
1
X15 Microswitch, socket
2
X10 Switch for filter shake off system
3
X3
Electric solenoid
4
X2
Electric solenoid
5
X1
Electric solenoid
6
X13 Socket
7
X14 Socket
8
X7
Suction turbine
9
X6
Power switch
10
X5
Suction turbine
11
X4
Power switch
12
X9
Electrodes, overflow protection
13
X8
Electrodes, overflow protection
14
X16 Speed regulation
15
X12 Indicator lamp, socket
16
X11 Indicator lamp, socket