Karcher UR 1040 User Manual - page 6
16 - EN
switch back to the clock display.
9.
The ALARM indicator is lit indicating that the alarm is active.
Functions
Activating/Deactivating an Alarm
To deactivate a previously set alarm, press and hold the respective ALARM button (1 or
2) during regular clock display for 2 seconds until the alarm indicator disappears. This
alarm is now deactivated and will not ring.
To activate a previously set alarm, press and hold the respective ALARM button (1 or 2)
during regular clock display for 2 seconds until the alarm indicator appears in the display.
This alarm will now ring at the previously set time.
Alarm Duration and Stopping an Alarm
Once active the alarm (buzzer or radio) will sound for 30 minutes. To stop the active alarm,
press the respective ALARM button (1 or 2) or the On/Off button (9) once. The alarm will stop
and come back on again at the set time.
Snooze Function
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the
Snooze button (4) once while the alarm is active. The alarm will stop and come on again after 9
minutes. To cancel this function, press the On/Off button (9) once.
Nap Function
The nap function enables you to set a timer after which the buzzer will sound.
During clock display mode, repeatedly press the NAP button (1) to select a desired dura-
tion until the buzzer sounds.
To check the remaining time on the timer, press the NAP button (1) once. To disable the alarm once it sounds, press the On/Off button (9). If you want to cancel the function, press the NAP button (1) repeatedly until “OFF” ap- pears in the display. Date Display 7RGLVSOD\WKHGDWHSUHVVWKH<0'EXWWRQRQFHGXULQJUHJXODUFORFNGLVSOD\7KLVZLOO show the year. 3UHVVWKH<0'EXWWRQRQFHDJDLQWRGLVSOD\PRQWKDQGGD\$IWHUVHFRQGVWKH display will switch back to the time. Month Day