Karcher UR 1305 User Manual - Radio Functions
20 | EN
• Switch the appliance off.
• Slide the FUNCTION switch (16) to the desired position (CD, RADIO or BUZZER). Adjust the
volume.
- For FM alarm, tune to the desired radio station
• Press the ALARM1 button (3) to set ALARM1. The clock display flashes.
• Press the HOUR and MINUTE buttons (13 and 14) to set the desired time, and press the
ALARM1 button to confirm the setting. The ALARM1 indicator (21) is ON.
• Press the ALARM2 button (2) to set ALARM2. The clock display flashes.
• Press the HOUR and MINUTE buttons (13 and 14) to set the desired time, and press the
ALARM2 button to confirm the setting. The ALARM2 indicator (22) is ON.
• To cancel the alarm, press the ALARM1 or ALARM2 button once.
Snooze alarm
The default snooze time is 6 minutes.
• To snooze the alarm, press the SNOOZE button (20) once. The SNOOZE indicator (26) is ON,
and the ALARM indicator flashes. The alarm sounds again after the snooze time has elapsed.
• To stop the alarm, press the ON/OFF button (17). The alarm is automatically set for the next day.
Radio functions
• To select the radio band, slide the FUNCTION switch (16) to the FM position.
• To select a frequency or radio station, turn the TUNING dial (15) until the desired frequency is
set.
To improve the reception of the FM frequency, extend the aerial antenna.
CD functions
• To select the CD function (it Supports CD, CD-R, CD-RW), slide the FUNCTION switch (16) to
the CD position.
• To insert a CD:
- Open the appliance with the OPEN button (18).
- Insert the CD with the label upwards.
- Close the CD compartment (19).
• Switch on the appliance. The display shows the total number of tracks on the CD for two sec-
onds. After two seconds, the appliance returns to clock display.
• To start playback, press the PLAY/PAUSE button (11) once.
During playback, the following functions are available:
• To show the number of the track that is currently playing, press the DISPLAY button (8).
• To select a track, press the SKIP BACKWARD/MINUTE button (14) or the SKIP FORWARD/
HOUR button (13) until the desired track is set.
• To search for a specific point on the disc, hold the SKIP BACKWARD/MINUTE button (14) or the
SKIP FORWARD/HOUR button (13) until the point is reached and release the button.
• To pause playback, press the PLAY/PAUSE button (11) once; to resume playback, press the
button again.
• To stop playback, press the STOP button (12).