Karcher WD 2 Operating Instructions Manual - page 9
– 9
Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
If required, rinse the container and accessories
with water properly and dry them before reuse.
Illustration
When necessary, clean the foam or cartridge filter
under running water only, do not wipe or brush
down. Allow to dry completely prior to installation.
You can install a cartridge filter instead of a foam filter.
Prior to installing the cartridge filter, remove the
black cover cap and keep it for later use with the
foam filter.
Insert the cartridge filter and lock it with a bajonet
lock.
If the cleaning power of the appliance deteriorates
please check the following:
Accessories, suction hose or suction pipes are
clogged, please remove the obstruction using a
stick.
Filter bag is full, install new filter bag.
Foam filter is contaminated, clean it under running
water.
Cartridge filter is dirty, knock off dirt from cartridge
filter and clean under running water if necessary.
Replace damaged filter.
Subject to technical modifications!
Care and maintenance
Special accessories
Troubleshooting
Decreasing cleaning power
Technical specifications
Mains voltage
1~50-60 Hz
220 - 240
V
Mains fuse (slow-blow)
10
A
Container capacity
20
l
Water intake with handle
11,5
l
Water intake with floor noz-
zle
8,5
l
Output P
nom
1000
W
Power cord
H 05VV-F2x0,75
Weight (without accesso-
ries)
5,4
kg
Sound pressure level (EN
60704-2-1)
77
dB(A)