Karman Healthcare MVP 502 series Owner's Manual - 4. Operation
9
4. OPERATION
4.1 Preparing For Use
4.1.1 Unfolding
Hold the grip and fold up the back joint, and you can hear a sound. (See Figure 4.1.)
Pointing your fingers inward with the palm of your hand on the frame, push down until the seat is fully lowered. Make sure the
frame is firmly seated in its holder. (See Figure 4.2)
Push down the joint of the backrest support unit. (See Figure 4.3.) (option)
Push down the joint of the rigidifying push-bar, and you can hear a sound. (See Figure 4.4)(option)
Attach the
upholstery to the chair. (See Figure 4.5)
Put the bracket of swing-away footrest into the front tube of frame. (See Figure 4-6.)
Put the footrest pivot into the end hole of front tube of frame. (See Figure 4-7.)
Swing the footrest to make the release pins fall into the hole of hanger lock base. (See Figure 4-8.)
Attach the headrest and tighten the knob bolts. (See Figure 4-9 and Figure 4-10.)
Figure 4.1
Figure 4.2
Figure 4.3
Figure 4.4
Figure 4.5
Figure4-6
Figure4-7
Figure4-8
Figure 4.9
Figure 4.10