Summary of Standing Wheelchair
Page 1
Instruction manual standing wheelchair karman healthcare inc..
Page 2: Table Of Contents
1 table of contents p.3 xo-101: parts explanation chapter 1. Safety tips 1-1. Standing 1-2. Wheel locks 1-3. Rear wheels 1-4. Armrests 1-5. Power drive attachments 1-6. Modifications chapter 2. Unpacking and preparing the stand up wheelchair xo series stand up wheelchair for use 2-1. The original pa...
Page 3: Xo Series
2 xo series 01 back-rest 08 arm-rest 02 chest strap 09 side panel 03 controller 10 seat belt 04 hand rim & rear wheel 11 leg straps 05 wheel lock 12 gas spring 06 anti-tippers 13 control box 07 footrest 14 heel strap 1 2 3 4 5 6 7 14 13 12 11 10 9 8.
Page 4
3 chapter 1. Safety tips 1-1. Standing attention ： ● before using the standing wheelchair you should be familiar with the operation and the functions of the xo units’ parts. ● when using the standing function, use only in standard household and/or hard even ground conditions. Not use when ground is ...
Page 5
4 1-3. Rear wheel 1-3.1. Quick release axles make sure the wheels axle is all the way through before mounting the xo unit. If the release button is inside the frame, the wheels will release and the user will be in danger. 1-3.2. Pneumatic tires check pneumatic tires weekly for proper inflation level...
Page 6
5 chapter 2. Unpacking and preparing the standing wheelchair xo series for use 2-1. The original package contains the following components. ● standing wheelchair w/ heel strap & chest belt ● knee support ● charger ● pump ● oil pot ● user manual and tool for adjustments ● option as ordered 2-2. Unfol...
Page 7
6 chapter 3. Adjustment should you require adjustments and alterations to the mechanism of the wheelchair, or any maintenance work, please contact qualified technicians. 3-1. Adjusting the seat depth （ 1 ） pull upward or push forward on the handle controller, let the wheelchair frame rise over the r...
Page 8
7 3-2. Adjusting the backrest height （ fig-10~13 ） （ 1 ） remove the padded backrest. （ 2 ） after opening the screws, the backrest height can be adjusted in 2 cm increments. （ 3 ） retighten the screws. 10 11 8 12 13.
Page 9
8 3-3. Adjusting the footrest height the height of the footrest is adjustable and should be altered in line with your body proportions to guarantee the best standing position possible. Footrest adjustment should also take account of your choice of seat cushion. （ fig-14~16 ） ● after loosening the sc...
Page 10
9 3-4. Adjusting the footrest angle ● after release the screws the footplate angle can be adjusted using the different hole at 10 ° incline angle. （ fig-17&18 ） ● retighten the screws. （ fig-19 ） 3-5. Adjusting the wheel lock note: make sure pneumatic tires are properly inflated （ level listed on ti...
Page 11
10 ● loosen the socket head cap screw on the top of the clamp. Slide the mounting bar forward or backward and rotate it to the correct angle position. The knurl should be embed into the tire approximately 5/16” when in the locked position. （ fig-20 ） ● make sure to retighten the socket head cap scre...
Page 12
11 3-6-2. The safety belt （ fig-23 ） ● the safety belt holds the waist in place. ● make sure that the safety belt is secure on the backrest of velcro fasteners. ● to release the safety belt. Simply press the red button in the center of the catch. ● to slacken, hold the catch at a right angle to the ...
Page 13
12 （ 3 ） retighten the screws of clamp. Folding the backrest ● release the knobs. （ fig-30 ） ● pull the flip-back armrest upward （ fig-31 ） ● grasp the wheelchair at the backrest and pull upward and then push forward up to stop （ fig-32&33 ） 30 31 32 33 27 28 29.
Page 14
13 3-8. The quick release rear wheels ● the quick-release axles, the rear wheels can be easily removed and set back on place （ fig-34 ） ● depress the release button in the center of the wheel, then pull outward or re-mount the wheel. ● having mounted the wheel, push and pull it several times to ensu...
Page 15
14 chapter4. Operating the standing and sitting functions 1. First, adjust and fix the knee support to suit position and make sure the two triangular form of knee support lock to the double-head screws of frame. （ fig-36&37 ） 2. Fix and lock in the safety belt. （ fig-38 ） 3. Fix and strap on the che...
Page 16
15 chapter 5. Control system 5-1. Battery and control box connection the main electrical control system is composed of motor, control box, battery and controller. Connect the power cord of control box to the battery. （ fig-40&41 ） battery capacity indictor 5-2. Battery charge （ fig-42 ） 1. First, co...
Page 17: Attention:
16 the buzzers for battery capacity & controller battery power indicator color battery capacity controller sound of buzzer green full power switch on sound short 1 times full power switch off （ not using over 30 min ） sound short 1 times yellow low power ◎ switch on sound short 1 times low power ◎ s...
Page 18
17 chapter 6. Maintenance ● when cleaning your xo series use a dry or slightly moistened cloth to wipe the wheelchair down. For stubborn or oily stains, apply a mild detergent to the cloth. Do not hose down your xo series with water. ● according to frequency of use, check tire pressure between once ...
Page 19: Warranties
18 warranties frame electrical parts 3 years 1 year 6 months 1. Structural frame components including platform, fork, seat post and frame welds are warranted, to the original owner 2. To present a claim, customer shall deliver the defective part for exchange or repair if possible to an authorized ka...