1. DL manuals
  2. Karman Healthcare
  3. Wheelchair
  4. XO-202 Series
  5. Instruction Manual

Karman Healthcare XO-202 Series Instruction Manual

Manual is about: POWER STAND UP WHEELCHAIR

Summary of XO-202 Series

  • Page 1

    Instruction manual power stand up wheelchair karman healthcare inc..

  • Page 2: Table of Contents

    Table of contents p.3 xo-202: parts explanation chapter 1. Safety tips 1-1. Standing 1.2. Important symbols found on the vehicle 1-3. Safety information on driving and freewheel mode 1-4. Rear wheels 1-5. Armrests 1-6. Power drive attachments 1-7. Modifications chapter 2. Unpacking and preparing the...

  • Page 3: Xo-202 Series

    Xo-202 series 01 02 03 04 05 06 07 08 09 10 11 12 01 backrest 07 armrest 02 chest belt 08 controller chest belt 03 side panel 09 seat rest 04 rear wheel 10 knee support set 05 motor/differential gear 11 footrest 06 front wheel 12 stand up casters.

  • Page 4: Chapter 1.  Safety Tips

    Chapter 1. Safety tips powered chair electromagnetic interference (emi) warnings the following warning listed below should reduce the chance of unintended brake release or powerchair movement, which could result in serious injury. 1. Do not operate hand-held transceivers (transmitter-receivers), suc...

  • Page 5

    1-2.Important symbols found on the vehicle do not drive over uneven ground! Danger of tipping over! Do not lean out of the raised verticalizer! Danger of tipping over! Never drive on ascending or downward slopes when the verticalizer is raised! Danger of tipping over! Never reach into the moving app...

  • Page 6

    ● never attempt to overcome an obstacle when on an uphill or downhill gradient! ● never attempt to drive up or down a flight of steps with your wheelchair! ● always approach straight on! Ensure that the front wheels and rear wheels move over the obstacle in one stroke! Do not stop halfway! Do not ex...

  • Page 7

    1-7. Modifications marking any unauthorized modifications or using parts not supplied by (karman healthcare inc.) may change the wheelchair structure and create an unsafe condition voiding the warranty. This product has been supplied from an environmentally aware manufacturer that complies with the ...

  • Page 8

    Chapter 2. Unpacking and preparing the power stand up wheelchair xo-202 series for use 2-1. The original package and accessories the following components: ● power stand up wheelchair wheel strap & chest belt ● knee support ● charger (usa users check charger switch is set to 115vac) ● oil pot ● user ...

  • Page 9: Chapter 3.  Adjustment

    Chapter 3. Adjustment should you require adjustments and alterations to the mechanism of the wheelchair, or any maintenance work, please contact qualified technicians. 3-1. Adjusting the seat depth （ 1）pull upward（push forward） the handle controller let the wheelchair frame rise over the rear wheel....

  • Page 10

    10 9 11 12 3-3. Adjusting the footrest height the height of the footrest is adjustable and should be altered in line with your body proportions to guarantee the best standing position possible. Footrest adjustment should also take account of your choice of seat cushion. （fig-13 ~ 16） 13 14.

  • Page 11

    ● after loosening the screws the footrest height can be adjusted using the different holes at 1.8cm distance. ● retighten the screws.（not too tight） 3-4. Adjusting the footrest angle ● after release the screws the footplate angle can be adjusted using the different hole at 10° incline angle. （fig-17...

  • Page 12

    3-5-1. The knee support the knee support holds the knees in an extended posture and prevents you slipping out the power wheelchair while standing up. Attach the two triangular form of the knee lock support to the double-head screws on either side of the wheelchair.（fig-20） center the knee support in...

  • Page 13

    23 24 25 3-6. Adjusting the armrest height （ 1） release the left（right）screws up to the clamp can be removed to suit position.（height 7”~10”） （fig-26 & 27） （ 2） retighten the screws of clamp. 26 27 3-7. The heels strap （ fig-28） the purpose of the heel strap is to prevent the legs and feet slipping ...

  • Page 14

    3-8. Gas spring the gas springs are specially designed to help hold your body weight in the balance. Note: contents under pressure. Do not take apart puncture apply heat or fire. 3-9. The seat cushion the velcro fasteners prevent the cushion from slipping out of place even when you are standing up. ...

  • Page 15: Chapter4.  Driving

    Chapter4. Driving 4-1 before driving for the first time before you take your first trip, you should familiarize yourself well with the operation of the vehicle and with all operating elements. Take your time to test all functions and driving modes. Attention: ● you are within easy reach of all opera...

  • Page 16: 4-4 Free Wheeling:

    ● never attempt to turn around on an incline or a slope. Danger: ● when the vertical is raised drive operation only serves positioning and not normal driving. ● never driver over uneven ground, on an upward or downward slope obstacles when the vertical. 4-4 free wheeling: because the motors are desi...

  • Page 17

    Chapter5. Operation the standing and sitting 1. First, adjusting and fixed the knee support to suit position and make sure the two triangular form of knee support lock to the double-head screws of frame. （fig-30 & 31） 30 31 2. Fixed the safety belt.（fig-32） 3. Fixed the chest belt.（fig-33） 32 33 4. ...

  • Page 18

    Chapter 6. Control system 6-1. The shark ii remote assembly of the remote 1. Battery gauge 2. On/off 3. Activate / connect through / deactivate adjusting mode 4. Decrease speed 5. Speedometer 6. Horn 7. Increase speed 8. Attendant control led 9. Service indicator led 10. Joystick lower side 1. Combi...

  • Page 19

    6-2. Battery and control connection the main electrical control system is composed of motor, control box battery and controller. The connection of control system as below. Stand up motor 6-3. Battery charge （ fig-34） 1. First, the battery charge line connects to the battery dc power socket and make ...

  • Page 20: Attention:

    3.Charge your battery from the battery charger provided by manufacturer only. 2 .New battery must charged over 8 hours. 1. Anytime check the battery capacity. Attention: 6-4. Main circuit breaker the mean circuit breaker reset button is located on the battery box. ( fig 35). The main circuit breaker...

  • Page 21: Chapter 7.  Maintenance

    Chapter 7. Maintenance ● when cleaning your xo-202 series use a dry or slightly moistened cloth to wipe the wheelchair down. For stubborn or oily stains, apply a mild detergent to the cloth. Do not hose down your xo- 202 serieswith water. ● according to frequency of use, check tire pressure between ...

  • Page 22: Warranties

    Flash codes flash codes indicate the nature of an abnormal condition directly from the shark information gauge. Without the use of any servicing tools, the condition can be simply diagnosed. Flash code description 1 user fault possible stall timeout or user error. Release the joystick to neutral and...

  • Page 23

    1. Structural frame components including platform, fork, seat post and frame welds are warranted, to the original owner 2. To present a claim, customer shall deliver the defective part for exchange or repair if possible to an authorized karman provider. 3. This warranty is for the replacement or rep...