1. DL manuals
  2. Karman Healthcare
  3. Wheelchair
  4. XO-505
  5. Instruction Manual

Karman Healthcare XO-505 Instruction Manual

Manual is about: Power Stand-Up and Recline Power Wheelchair

Summary of XO-505

  • Page 1

    Karman healthcare xo-505 power stand-up and recline power wheelchair 07/07/2015ec instruction manual.

  • Page 2: Contents

    1 contents xo-505 series : parts explanation 3 chapter 1. Safety tips 4 1-1. Standing 4 1.2. Important point to note for operating the wheelchair 5 1-3. Safety information on driving and free wheel mode 5~6 1-4. Rear wheels 6 1-5. Armrests 6 1-6. Power drive attachments 6 1-7. Modifications 6 chapte...

  • Page 3: Chapter 5.

    2 chapter 5. Operation the standing and sitting 15 chapter 6. Control system 16 6-1. The dynamic dx2 remote 16 6-2. Battery and control box connection 17 6-3. Battery charge 17~18 6-4. Main circuit breaker 18 6-5. System lock / unlock & sleep mode / wake up 19 6-6. Standard menu navigation drive mod...

  • Page 4: Xo-505    Series

    3 xo-505 series 01 headrest 10 joystick 02 backrest 11 front stick supporter 03 armrest 12 seatrest 04 side panel 13 knee support 05 recline actuator 14 legrest 06 footrest motor/differential gear 15 footrest 07 anti-tipper wheel 16 swing caster 08 rear wheel 17 front wheel 09 h-style belt 18 chapte...

  • Page 5

    4 ● before using the stand up wheelchair you should supposed to be familiar with the operation and the function. ● use only standard household and hard even ground. Not use in the ground of dripping wet. ● in case of staircase, the stand up wheelchair must be carried by two persons. ● when rides or ...

  • Page 6

    5 1-2. Important point to note for operating the wheelchair : the following action should not attempt to try do not drive over uneven ground! Danger of tipping over! Do not lean out of the raised verticalizer! Danger of tipping over! Never drive on ascending or downward slopes when the verticalizer ...

  • Page 7

    6 obstacle in one stroke! Do not stop halfway! Do not exceed the maximum obstacle height! ● avoid shifting your center of gravity as well as abrupt joystick movements and changes of direction when the wheelchair is in motion! ● never use the wheelchair to transport more than one person! ● do not exc...

  • Page 8: Chapter 2.

    7 chapter 2. Unpacking and preparing the power stand up wheelchair for use 2-1. The original package and accessories the following components: ● power stand up wheelchair & joystick & heel strap & chest belt ● knee support ● charger ● user manual, oil pot and tool ● option as order 2-2. Unfolding th...

  • Page 9

    8 003 after the back cushion to stop positive ,align the hole and tighten screws ( not too tighten ) 004 alignment holes and tighten the screw 005 complete screws locking 006 to assemble the actuator and tighten the screw ( not too tighten ) 007 use cable tie to fixed cable 008use cable tie to fixed...

  • Page 10

    9 009 use cable tie to fixed cable 010 use cable tie to fixed cable 011 to assemble head rest 012 to assemble head rest.

  • Page 11: Chapter 3.

    10 chapter 3. Adjustment should you require adjustments and alterations to the mechanism of the wheelchair, or any maintenance work, please contact qualified technicians. 3-1. Adjusting the seat depth （1）push the joystick forward let the wheelchair frame rise . (fig-7) ( 2）after loosening the left（r...

  • Page 12

    11 3-2. Adjusting the footrest height the height of the footrest is adjustable and should be altered in line with your body proportions to guarantee the best standing position possible. Footrest adjustment should also take account of your choice of seat cushion. （fig-11 ~ 14） ● after loosening the s...

  • Page 13

    12 3-3. Adjusting the footrest angle ● after release the screws the footplate angle can be adjusted using the different hole for 3 range. （fig-15 & 16） ● retighten the screws.（fig-17） 3-4. Adjusting the knee support and safety belt and chest belt the most important safety features of the stand up wh...

  • Page 14

    13 3-4-2. The safety belt （fig-20） ● the safety belt holds the waist in place. ● make sure that the safety belt is secure on the backrest of velour fasten. ● close the catch on the safety belt and pull it and not too tight. ● to release the safety belt. Simply press the red button in the center of t...

  • Page 15

    14 3-5. Adjusting the armrest height （1） release the left（right）screws can be removed to suit position.（fig-24） （2） retighten the screws .(fig- 24) 3-6. The heels strap （fig-25） the purpose of the heel strap is to prevent the legs and feet slipping backwards. It is fitted behind the heels or higher....

  • Page 16

    15 3-8. The seat cushion there is a choice of various different seat cushions, governed by your individual needs. The velcro fasteners fitted to the surface of your seat should allow you to attach the majority of set cushions securely. The velcro fasteners prevent the cushion from slipping out of pl...

  • Page 17: Chapter 4.

    16 chapter 4. Driving 4-1. Before driving for the first time before you take your first trip, you should familiarize yourself well with the operation of the vehicle and with all operating elements. Take your time to test all functions and driving modes. Attention: ● you are within easy reach of all ...

  • Page 18: Off

    17 danger: ● when the vertical is raised drive operation only serves positioning and not normal driving. ● never driver over uneven ground, on an upward or downward slope obstacles when the vertical. 4-4. Free wheel because the motors are designed to engage the electromagnetic brakes when the vehicl...

  • Page 19: Chapter 5.

    18 chapter 5. Operation the standing and sitting 1. First, adjusting and fixed the knee support to suit position and make sure the two triangular form of knee support lock to the double-head screws of frame. （fig-31 & 32） 2. Fixed the safety belt and chest belt.（fig-33） 3. Push the joystick of wheel...

  • Page 20: Lower Side

    19 chapter 6. Control system master power switch ※ open the master power switch before using. 6-1. The dynamic dx2 remote assembly of the remote 1. On/off 2. Left indicator button 3. Function keys i 4. Drive profile selection+ 5. Drive profile selection- 6. Horn 7. Joystick 8. Accessory mode selecti...

  • Page 21

    20 6-2. Battery and control connection the main electrical control system is composed of motor, control box battery and controller. The connection of control system as below. 6-3. Battery charge （fig-34） 1. First, the battery charger line connect to the battery dc power socket and make sure the line...

  • Page 22: Attention:

    21 battery warnings battery warnings are shown at the centre of the screen, in the "active mode" area . 6-4. Main circuit breaker the mean circuit breaker reset button is located on the battery box. ( fig -35). The main circuit breaker monitors the electric current drawn form the battery. It is a sa...

  • Page 23

    22 6-5. System lock / unlock & sleep mode / wake up if the lock enable parameter is set to 'yes', the system can be locked by pressing the power button for more than 4 seconds. To lock the dx system press the power button for 4 seconds when the dx system is turned on.  the dx system will turn off i...

  • Page 24

    23 6-6. Standard menu navigation drive mode - standard the colour of the current drive profile, shown in the middle of the screen, is dependent on the chair’s status. A green drive profile shows a normal drive operation an orange drive profile is displayed to indicate that a chair can drive, or is d...

  • Page 25

    24 . 6-7. Accessory mode – standard accessory modes are available: ● when the presence of that accessory is detected in the dx system; ● when the menu of that accessory has been enabled with its corresponding menu enable parameter when the accessory mode button is pressed (either next or previous) t...

  • Page 26

    25 6-8. Flash codes flash codes indicate the nature of an abnormal condition directly from the dx2 information gauge. Without the use of any servicing tools, the condition can be simply diagnosed. Flash code description action 1 dx module fault turn the dx system off then on again. Check dxbus conne...

  • Page 27: Chapter 7.

    26 chapter 7. Maintenance ● when cleaning your stand up wheelchair use a dry or slightly moistened cloth to wipe the wheelchair down. For stubborn or oily stains, apply a mild detergent to the cloth. Do not hose down your wheelchair with water. ● according to frequency of use, check tire pressure be...

  • Page 28

    27 warning! Failure to maintain the brushes could void the power wheelchair warranty. To inspect or replace the motor brushes: 1. Unscrew the motor brush caps. (fig-45) 2. Remove the brushes. 3. Inspect the brushes for wear. (fig-46) 4. Replace the brushes if necessary. This product has been supplie...

  • Page 29: Notice

    28 notice this chair is not intended for those who have: -lower limbs joint contracture (absolute contra-indication) -total hip replacement (thr) and total knee replacement (tkr) -instability on lower extremity joints -severe osteoporosis on lower extremities -severe abnormal reflex (lower extremiti...

  • Page 30: Warranty

    29 warranty frame electrical parts motor/transaxle/brake 3 years 1 year 1 year 1 year 1. Structural frame components including platform, fork, seat post and frame welds are warranted, to the original owner/ 2. To present a claim, customer shall deliver the defective part for exchange or repair if po...