KARUIZAWA KSF1613 User Manual - page 3
PARTS DESCRIPTION
INSTALLATION INSTRUCTION
Caution: Please unplug the appliance before installation.
1. Base and motor installation
‧ Loosen the height adjustment ring, then put the base cover on the outer pole (Fig. 1).
‧ Lift the inner pole to certain height and screw the height adjustment ring in clockwise
direction (Fig. 2).
‧ Fit the outer pole into the centre section of the base plate (Fig. 3).
‧ Fasten the base knob at the bottom of the base plate to fix the position of the outer
pole with the base plate (Fig 4).
‧ Loosen the screw on the bottom of the head unit but do not unscrew it totally
(Fig. 5).
‧ Place the head unit on the inner pole and tighten the screw (Fig. 6).
Fig.1 Fig.2 Fig.3
Fig.4 Fig.5 Fig.6
2. Grille and fan blades installation
A. Rear grille
‧ Unscrew the fan blade knob from the motor shaft in clockwise direction (Fig. 7).
‧ Unscrew the grille knob from the motor shaft in anti-clockwise direction (Fig. 8).
‧ Set the rear grille and fit it well on the three position poles and make sure these poles
are properly put through the holes on the rear grille. Hold the rear grille and tighten
the grille knob in clockwise direction on the motor shaft (Fig. 9) .
Fig.7 Fig.8 Fig.9
B. Fan blade
‧ Install the fan blade through the fan blade position hole. Ensure the fan blade grooves
fit the motor shaft fixing pin and push in until it reaches the fixing pin (Fig 10).
1.Front grille
2.Fan blade
3.Grille ring
4.Height adjustment pole (inner)
5.Height adjustment ring
6.Height adjustment pole (outer)
7.Base cover
8.Base plate
9.Power cord
10.Motor
11.Oscillation Knob
Height
adjustment
ring
Base
cover
Twist in
clockwise
direction
Bottom part of
the outer pole
Centre
section
on the base
plate
Base
knob
Screw
Screw
Insert
position
poles
grille knob
-4-
-5-