2 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Designed by kasama cooperate with ultimate heli-uae 1359 41 9 19 4.
3 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Thank you for your purchase of srimok 90 radio controlled helicopter . The srimok 90 was designed and developed by mr. Kasama thaworn. With strong and friendly suppor...
4 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Swash plate and link installation 29 wash out arm installation 30 center hub and seesaw installation 31 rotor grip blade installation 32 rotor head linkage 33 cyber s...
5 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Skid pipe end cap landing skid pipe set screw m4x5 plastic landing gear skid parts list item part number description qty 1 ksm70-f09 skid pipe end cap 4 2 ksm10-f25 l...
6 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. The fuel tank cap assembly 1) tighten the plug bolts until they are flush with the plug. 2) insert plug fully into tank. 3) rotate plug until bolts are level with tan...
7 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Main frame assembly 3-box1 cyclic servo, extension gv mount frame cross member balance damper mount support socket screw m3x8 washer 3x7x1.0 fuel tank mounting rubber...
8 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Main frame assembly 4-box1 fuel tank mounting rubber main frame l g10 eco wire mounting rubber balance damper mount support ksm mark below and outside parts list item...
9 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Main frame assembly 4-box1 parts list item part number description qty 1 ksm60-031 socket screw m3x32 3 2 ksm60-091 socket screw m3x35 1 3 ksm60-034 socket screw m3x8...
10 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Notice : press the two parts together and tighten the 2 m3 pinch bolts. Make sure the shaft runs smoothly. Notice : the pinion shaft must reach and be level with the...
11 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Bevel pinion gear installation 5-box2 adjust bevel pinion gear detail e bevel pinion gear set adjust bevel pinion gear washer m3x7x1.0 socket screw m3x32 hex lock nu...
12 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Optional plastic film included if required tail boom clamp installation 6-box2 socket screw m3x32 hex lock nut m3 tail boom clamp front tail boom clamp rear washer m...
13 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Bearing block installation 7-box2 center main bearing block lower main bearing block upper main bearing block hex lock nut m3 socket screw m3x32 washer m3x7x1.0 sock...
14 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Crown gear hub 6061 crown gear 70t taper screw m3x8 one way bearing shaft one way key autorotation bearing main gear case 6061 main gear 99t taper screw m3x6 one way...
15 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Main shaft and main gear installation 9-box2 parts list item part number description qty 1 ksm20-ts03 mast lock pin 1 2 ksm20-ts02 main mast 1 3 ksm10-ts15 mast lock...
16 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Step in assembly bevel pinion gear clearly more above can see in tips & information at www.Kasama.Com after main gear is inserted you can adjust bevel gear up and do...
17 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Turn the engine mount side till the mark ksm in the same direction. Engine mount side washer 4x8x1 socket screw m4x20 engine mount center washer 3x8x1.5 socket screw...
18 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Engine mount assembly 1) insert the m3x12 screws to attach the engine side mount to the engine center mount. Make sure the screws are not too tight and the engine si...
19 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Practise assembly 1. Before assembling the cooling fan and hub to the engine, pull the crankshaft up and down to ascertain the degree of movement – this is eliminate...
20 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Pinion gear (12t) magnets(not include) clutch bell bearing 12x21x5 clutch o-ring socket screw m4x8 socket screw m3x8 clutch shoe start shaft cooling fan hub socket s...
21 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Cooling fan shroud assembly 12-box1 hex lock nut m3 washer m3x7x1.0 socket screw m4x35x20 hex lock nut m3 washer m3x7x1.0 socket screw m3x35 washer m4x8x1 hex lock n...
22 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. M3x12 engine mount screws gap between cylinder head and cooling shroud should be the same on both sides. Before tightening clutch bearing block make sure starter sha...
23 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Mount hexagon start coupling to shaft before mounting m3x8 bolts clutch bearing block mount installation how to adjust clutch bearing block mount 13-box3 o-ring damp...
24 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Parts list 14-1 item part number description qty 1 ksm10-c04 radius arm stay 1 2 ksm40-c02 elevator lever stay (rear) 1 3 ksm40-c03 elevator lever stay (front) 1 4 k...
25 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. . Parts list 15-2 item part number description qty 1 ksm60-034 socket screw m3x8 2 2 ksm10-f23 cyclic main servo mount 1 3 ksm60-062 set screw m3x12 2 4 ksm10-f21 ca...
26 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Universal servo horns screw (include in servo kit) cyclic servo mount cyclic damper rubber cyclic damper support servo mounting adapter jr m2.5 or futaba m2.5 cyclic...
27 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Socket screw m3x20 aileron lever arm bearing plate cylclic lever 0.0 mm. Notice: aileron lever arm must be touch with bearing cyclic servo installation 16.
28 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Elevator servo assembly 17-box3 socket screw m2x4 set screw m4x5 joint coupling plate universal servo horns universal shaft holder coupling rubber servo mount servo ...
29 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Swash plate and link installation 18-box3 ball link with radius arm stay traveling bearing. Swash plate assembly ball link plastic black swash plate control rod 3 4 ...
30 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Wash out arm installation 19-box3 wash out arm radius arm set screw m3 x 3 mm linkage ball m2.5x4.95x4 flank bearing 3x7x3 washout pin washout arm set washout base b...
31 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Caution: 1) socket screw m3x15 in item 9 should be softly tightened. Tighten both sides evenly. 2) should be use 490-520 mm. Flybar wire. Taper screw m3x10 head butt...
32 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Parts list 21-1 item part number description qty 1 ksm20-90h02 damper support 2 2 ksm70-h06 o-ring damper 6 3 ksm60-063 spacer 8x12x0.5t 4 4 ksm60-017 socket screw m...
33 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Parts list 21-3 item part number description qty 1 ksm70-h03 ball link plastic 8 2 ksm20-h10 mixing arm rod 78 mm. Stainless steel 2 3 ksm20-h12 stabilizer control r...
34 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Cyber swash plate drive installation 19-box3 parts list item part number description qty 1 ksm60-004 button screw m3x15 1 2 ksm10-h09 swash plate drive 1 3 ksm60-030...
35 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Cyber center hub installation 20-box3 socket screw m3x10 10 mm. Cyber center hub head button taper screw m3x10 socket screw m3x16 linkage ball m3x4.95x5 use the lowe...
36 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Linkage ball m3x4.95x6.5 mixing arm socket screw m3x15 linkage ball m2.5x4.95x4 spacer 8x12x0.5t main rotor grip holder 90 socket screw m5x27 thrust bearing d8xd16x5...
37 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Parts list 22-1 item part number description qty 1 ksm60-029 washer m3x7x1.0 2 2 ksm60-064 spacer 3x6x2.2 1 3 ksm60-065 spacer 3x6x10 1 4 ksm60-027 hex lock nut m3 1...
38 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Parts list item part number description qty 1 ksm20-t02 tail rotor shaft steel 1 2 ksm70-t06 tail pitch link 2 3 ksm30-106 frank bearing 2x5x2.5t 4 4 ksm10-t24 tail ...
39 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Tail boom lock screw factory hole level mark vertical fin main frame tail gear lock screw parts list item part number description qty 1 ksm40-t02 tail boom 1 1) asse...
40 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Hole in step 6 5) take a tail rotor head set off 8) drill 2.5 mm. Hole in tail boom support drive. 9) disassemble all step 7 and tail boom. 10) drill 3 mm. Holes in ...
41 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. . Front tail drive joint shaft drive guide ball bearing 8x14x4 torque tube tail boom cf 266 266 parts list item part number description qty 1 ksm10-t27 torque tube 1...
42 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Linear bearing need to be lubricated by greases every 20 flights. Gearbox lubrication: apply a drop of grease on four quadrants of the spiral gear whilst turning. Ev...
43 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Front frame plastic socket screw m3x32 hex lock nut m3 washer m3x7x1.0 parts list item part number description qty 1 ksm60-027 hex lock nut m3 3 2 ksm60-031 socket s...
44 note: apply blue thread lock to all screws, balls, and threads which it be fixed to metal-parts. For non-metal parts apply ca glue. Rubber grommet canopy parts list item part number description qty 1 ksm70-f07 canopy 1 2 ksm70-f04 rubber grommet 4 canopy installation 26-box1.