Summary of KD318EUI
Page 1
Four-port adsl router kd318eui adsl router user manual.
Page 2
Adsl router user manual notice this document contains proprietary information protected by copyright, and this manual and all the accompanying hardware, software, and documentation are copyrighted. All rights are reserved. No part of this document may be photocopied or reproduced by mechanical, elec...
Page 3
Content 1 overview .......................................................................................................................................... 1 1.1 f eatures .................................................................................................................................
Page 4: 1 Overview
Adsl router user manual 1 1 overview thank you for using this asymmetric digital subscriber line (adsl) router. With the asymmetric technology, this device runs over standard copper phone lines. In addition, adsl allows you to have both voice and data services in use simultaneously all over one phon...
Page 5
Adsl router user manual 2 1.1.4 atm capabilities atm connection vpi range: 0-255 vci range: 32-65535 aesa (e.164, dcc, icd) pvc support uni 3.0 & 3.1 signaling support aal 5 1.1.5 management support web based gui upgrade or update via ftp/http command line interface via telnet ...
Page 6
Adsl router user manual 3 1.3 system requirements before using this adsl router, verify that you meet the following requirements: subscription for adsl service. Your adsl service provider should provide you with at least one valid ip address (static assignment or dynamic assignment via dial-up con...
Page 7
Adsl router user manual 4 2 hardware description front panel rear panel port function dsl connects the device to an adsl telephone jack or splitter using a rj-11 telephone cable eth connects the device to your pc's ethernet port, or to the uplink port on your hub/switch, using a rj-45 cable usb conn...
Page 8
Adsl router user manual 5 3 hardware installation this hardware installation describes how to connect adsl router to your computer, lan and the internet. This installation assumes you have subscribed to an isp for adsl service and only covers the basic configurations to be applied to residential or ...
Page 9
Adsl router user manual 6 5 pc configuration guide 5.1 local pc configuration 5.1.1 windows 95, 98, me, xp 1. In the windows task bar, click the “start” button, point to “settings”, and then click “control panel”. 2. Double- click the “network” icon. 3. On the “configuration” tab, select the tcp/ip ...
Page 10
Adsl router user manual 7 5.2 access the program after configuring the ip address of you computer, powering on the adsl router, and launching a web browser, such as internet explorer, use http://192.168.1.1 to log on to the setting pages. Attention: the username and password are both lowercase. 5.3 ...
Page 11
Adsl router user manual 8 3. Click wan service from the left menu. 4. Click add to select a layer 2 interface for this service and then click next. 5. Choose wan service type, just choose pppoe for example here. You can enter your own service description here if you want and then click next..
Page 12
Adsl router user manual 9 6. Input ppp username & ppp password and then click next. The user interface allows a maximum of 256 characters in the user name and a maximum of 32 characters in the password. Pppoe service name can be blank unless your internet service provider gives you a value to enter....
Page 13
Adsl router user manual 10 enable fullcone nat, all requests from the same private ip address and port are mapped to the same public source ip address and port. Someone on the internet only needs to know the mapping scheme in order to send packets to a device behind the adsl router. The gateway can ...
Page 14
Adsl router user manual 11 7. Select a preferred wan interface as the system default gateway. 8. Get dns server information from the selected wan interface or enter static dns server ip addresses. If only a single pvc with ipoa or static mer protocol is configured, you must enter static dns server i...
Page 15
Adsl router user manual 12 5.3.2 remote access when the firewall is enabled on a wan or lan interface, all incoming ip traffic is blocked. However, some ip traffic can be accepted by setting up filters. 1. Select advanced setup=>security=>ip filtering=>incoming and choose add or remove to configure ...
Page 16
Adsl router user manual 13 5.3.3 tr069 client wan management protocol (tr-069) allows a auto-configuration server (acs) to perform auto-configuration, provision, collection, and diagnostics to this device. Inform: whether or not the cpe must periodically send cpe information to server using the info...
Page 17
Adsl router user manual 14 appendix frequent asked questions q: none of the leds are on when you power on the adsl router? A: please make sure what you use is the power adaptor attached with the adsl router package，and check the connection between the ac power and adsl router. Q: dsl led does not tu...
Page 18
Adsl router user manual 15 q: initialization of the pvc connection failed? A: be sure that cable is connected properly from the dsl port to the wall jack. The dsl led on the front panel of the adsl router should be on. Check that your vpi, vci, type of encapsulation and type of multiplexing setting ...
Page 19
Adsl router user manual 16.