Summary of KT101
Page 1
Kt101 broadband ip phone user manual.
Page 2
Ip phone user manual ２/ 42 content 1 product overview .................................................................................................................................................. ４ 1.1 introduction to ip telephony ...................................................................
Page 3
Ip phone user manual ３/ 42 5.7 supplementary service ............................................................................................................................ 35 5.7.1 call hold on music .................................................................................................
Page 4: Product Overview
Ip phone user manual ４/ 42 1 product overview 1.1 introduction to ip telephony internet protocol (ip) has its implementations in voice field. An example of this is the ip phone system, which carries voice via ip packets and can be implemented in ip networks, such as intranets, wans, and the internet...
Page 5: Situations
Ip phone user manual 5 / 42 supplementary services-call transfer(blind transfer and attended transfer), call forward (unconditional, when busy, when no answer),call wait, call hold, call pickup, multi-way conference, dnd, call block, etc primary and backup server connection switching firmware upgrad...
Page 6: View
Ip phone user manual 6 / 42 1.4 top view and button description figure 1-1 top view of kt101 table 1-1 and table 1-2 describe the buttons of kt101. Table 1-1 button description —function buttons press… to… enter the main menu for the lcd-based configuration in standby mode. Enter the submenu of the ...
Page 7
Ip phone user manual 7 / 42 enter the phone book menu when the handset is on-hook, where you can view and set contact entries. Do not disturb button in standby mode. The coming call will be refused after enable the dnd. Mute the call during the call conversation. The conference button, operation det...
Page 8: Installation
Ip phone user manual 8 / 42 2 installation 2.1 packing list • unpack the package carefully and check the following items: • one ip phone set kit (a phone base, a handset, and a handset cord) • one dedicated power adapter • one ethernet cable • one cd containing the user manual • if anything is broke...
Page 9
Ip phone user manual 9 / 42 figure 2-1 connect your kt101 the following table describes the connections in the figure. Table 2-1 description of the connections no. Connect… to… with… 1 lan interface the ethernet interface of an adsl modem or a switch straight-through cable 2 pc interface the network...
Page 10: Configuration
Ip phone user manual 10 / 42 line interface is used only for the phone which has pstn function. Microphone is used only the phone which has microphone connection port. Caution: make sure that you plug the connectors of the handset cord in their ports completely and securely. 3 configuration 3.1 intr...
Page 11
Ip phone user manual 11 / 42 to… do the following… enter the main menu press select an item from the menu press or to move the prompting arrow to the desired item press the button for the digit corresponding to the item enter a submenu press confirm your selection or input press change a setting do ...
Page 12
Ip phone user manual 12 / 42 subnet mask: subnet mask of the lan interface gateway default gateway pppoe name pppoe user name these items are available only when you set the ip mode argument to pppoe. Pppoe password pppoe password mac address mac address burned into the lan interface, which you cann...
Page 13
Ip phone user manual 13 / 42 needed for your kt101 to operate in dhcp mode. Follow these steps to configure the network connection type (refer to table 3-1 for basic button operations): 1) enter the main menu. 2) select [networks] and confirm to enter its submenu. 3) at the prompt of ―type password:...
Page 14
Ip phone user manual 14 / 42 4) navigate to the [forward mode] item. 5) set the forward mode argument to nat, bridge, or disable, and confirm the setting. 6) exit the configuration interface. 3.2.2 configuring protocol parameters protocol configuration refers to settings of voip, which enable your k...
Page 15
Ip phone user manual 15 / 42 applies to the dhcp and static address modes. It is recommended that you use the pc interface to log into the web configuration interface. To perform web-based configuration, you need a pc with a browser (ie 6.0 or later recommended) and tcp/ip installed. You also need t...
Page 16
Ip phone user manual 16 / 42 the left part of the main page is the navigation list, where links to configuration pages are located. Clicking on a link in the navigation list can have the corresponding configuration page appear on the right part of the main page. 3.3.2 configuring network parameters ...
Page 17
Ip phone user manual 17 / 42 figure 3-4 web configuration – lan setting - static for this mode, you must specify the ip address and subnet mask of the lan interface, and the default gateway manually. • ip address: ip address of the lan interface on your kt101. • subnet mask: subnet mask of the lan i...
Page 18
Ip phone user manual 18 / 42 and 10 minutes, mean the pppoe connection will be terminated after the lan interface is idle for 1, 4, or 10 minutes respectively. Remember to click to save your changes upon completion. You can also click to discard your changes. After the changes are successfully saved...
Page 19
Ip phone user manual 19 / 42 • subnet mask: subnet mask of the pc interface, which defaults to 255.255.255.0. • mac address: mac address burned into the pc interface, which you cannot change. Remember to click to save your changes upon completion. You can also click to discard your changes. Note: se...
Page 20
Ip phone user manual 20 / 42 kt101 is connected supports this function. Otherwise, your kt101 may be unable to obtain a network address, or you cannot place calls. Iv. Configuring dmz and static port mapping when operating in nat mode, your kt101 denies requests initiated from external ip networks. ...
Page 21
Ip phone user manual 21 / 42 figure 3-10 web configuration – dmz ip address: ip address of the dmz host. port begin/port end: beginning port number and end port number. Packets destined for the lan interface of your kt101 with destination port numbers within this range are forwarded to the corre...
Page 22
Ip phone user manual 22 / 42 figure 3-11 web configuration – static port map public port: number of the port on the lan interface. internal port: number of the port on the internal host. internal ip: ip address of the internal host. protocol type: protocol type of the packets to be forwarded...
Page 23
Ip phone user manual 23 / 42 figure 3-12 web configuration – protocol nick name: display nick name of your kt101. phone number: phone number of your kt101. authentication name: authentication id of your kt101. authentication password: authentication password of your kt101. domain name: dom...
Page 24
Ip phone user manual 24 / 42 i. Upgrading the firmware the [upgrade firmware] page is shown in figure 3-13. The [upgrade firmware] section is used to upgrade the firmware, while the [version info] section displays the current software version and hardware version of your kt101. Follow these steps to...
Page 25: Configuration Example
Ip phone user manual 25 / 42 4 configuration example 4.1 accessing networks through pppoe 4.1.1 scenario intended users: families or enterprises that access the internet through adsl or any other pppoe connections. Number of the available broadband connections: one. Devices required: one kt101 and o...
Page 26: 4.2.1 Scenario
Ip phone user manual 26 / 42 4.2 accessing networks using dhcp 4.2.1 scenario intended users: enterprises that access lans or the internet using dhcp. Number of the available dhcp connections: one. Devices required: one kt101 and one pc. Objective: the kt101 can be used to place calls while the pc c...
Page 27: 5.1.2 Redialing
Ip phone user manual 27 / 42 place a pstn call: for kt101d dual-mode phone to make a pstn call, pick up the handset and press the pstn switch button and then dial the number. Note: press to place a call after dialing the number. When dialing/answering a call, press to toggle the speaker on. If the p...
Page 28
Ip phone user manual 28 / 42 lookup and dialing. A contact name and the phone number are grouped in an entry in the phone book. Each entry contains three parts: the entry number, contact name, and phone number, as illustrated in the following figure. This section illustrates how to make use of the p...
Page 29: 5.2.2 Operation Examples
Ip phone user manual 29 / 42 the memory of the phone book displays memory information about the phone book, such as ―total:256 useful:216‖, among which: total: total number of the entries the phone book can hold. Useful: number of the entries available for new ones. Note: the phone book can hold up ...
Page 30: 5.4 Recorder
Ip phone user manual 30 / 42 in standby mode you can access the [recent calls] menu by either of the following: press . Press directly. The menu items, their functions, and related instructions of the [recent calls] menu are listed in table 5-2. Table 5-2 description of the recent calls menu item fu...
Page 31: 5.5 Voice Settings
Ip phone user manual 31 / 42 in table 5-3. Table 5-3 description of the recorder menu item description instruction enable recorder enable/disable the recorder function. Yes: enables this function. No: disables this function. Select the [enable recorder] item and press to toggle it on and off. Accept...
Page 32: 5.5.1 Voice Setting
Ip phone user manual 32 / 42 the input/output volume of the handset, microphone, and speaker. The ring setting specifies the ring that indicates a incoming call. There are three factory-set rings in your kt101. You can add new rings by uploading ringing files to your kt101. Refer to section 5.5.2 ―v...
Page 33: 5.5.2 Voice Setting
Ip phone user manual 33 / 42 on handset microphone set the input volume of the handset. 1) select the [microphone] item and press . 2) press to increase the volume or 3) press to decrease the volume. Press to confirm. Speaker set the output volume of the handset. 1) select the [speaker] item and pre...
Page 34: 5.6 Alarm Clock
Ip phone user manual 34 / 42 speaker input volume (0 -15): input volume of the microphone, ranging. A bigger number corresponds to a higher volume. Speaker output volume (1 -15): output volume of the speaker, ranging from 1 to 15 . A bigger number corresponds to a higher volume. Ring type: type of t...
Page 35: 5.7.1 Call Hold On Music
Ip phone user manual 35 / 42 add alarm set an alarm 1) select the [add alarm] item and press ok> to display the prompts of ―set month to‖, ―set date to‖, ―set hour to‖, ―set minute to‖, ―set second to‖, and ―alarm message‖ displayed successively. 2) set the month, date, hour, minute, second, and the...
Page 36: 5.7.4 Call Forward
Ip phone user manual 36 / 42 on a’s lcd and also a can hear a prompt sound. If a doesn’t want to accept c, just press 【c】 button; if a wants accept c, press ―flash‖ button and b will be hold on then. 5.7.3 unattended/attended call transfer call transfer feature is available by default. The process o...
Page 37: 5.7.5 Prefix Number
Ip phone user manual 37 / 42 2) when busy: the call forwarding busy feature 3) no answer: the call forward no answer feature 4) disable: cancel all call forward features you can select any call forward feature, but you should enable the selected feature and make sure to set the forwarding phone numb...
Page 38: 5.7.9 Call Mute
Ip phone user manual 38 / 42 5.7.9 call mute mute feature is available by default. The process of mute is as following: during call conversation, you can press ―mute‖ button to mute your call and press ―mute‖ again to enable your voice. 5.8 others this section describes settings in the [others] menu...
Page 39
Ip phone user manual 39 / 42 ping test the connectivity between your kt101 and a specified network device. 1) select the [ping] item and press . 2) enter the ip address of the destination and press to begin testing. The lcd displays information in the format of success/total */#, among which: *: a n...
Page 40
Ip phone user manual 40 / 42 6 appendix a - troubleshooting symptom 1: my kt101 is not in the normal standby state (that is, the lcd never displays ip phone…), and the dial tone cannot be heard when i pick up the handset. Solution: 1) check to see if the lan indicator on the rear of the base lights....
Page 41
Ip phone user manual 41 / 42 7 appendix b - technical specifications 7.1 software specifications table 7-1 software specifications of kt101 item description protocol sip v2: rfc3261~rfc3266 mgcp: rfc3435 (compatible rfc2705), h.323: h.225,h.235,h.245,q.931 rtp/rtcp: rfc3550(compatible rfc1889/rfc199...
Page 42
Ip phone user manual 42 / 42 ethernet interface two rj-45 interfaces 10/100m autosensing mdi/mdix autocrossover power adapter input: 220 vac output: 12 vdc, 0.6 a weight (net) 0.67 kg (1.5 lb) physical dimensions (h ×w × d) 60 × 220 × 172 mm (2.4 × 8.7 × 6.8 in.) operating temperature 0℃ to 45℃ stor...