KATA S58 User Manual - page 16
-- 16 of 24 --
new incoming. You can hold the current incoming and answer the other
one. To make this function available, please contact local network
operator.
—Call divert
Call divert is a network function. With this function, an incoming can be
diverted to another phone number or voice mailbox, avoiding missing it.
There are several diverts available: Divert all voice calls, Divert if
unreachable, Divert if no answer, Divert if busy, Divert all data calls, and
Cancel all (diverts).
—Call barring
If the network supports, this function will enable you to restrict the
incoming or outgoing calls.
—Line switching
In Line switching, you can switch between Line 1 and Line 2.
Notice: If Line 2 is selected, whether you can make a successful call
depends on your network operator. For SIM 2 call settings, please refer
to SIM 1 call settings.
—Closed user group You can close user group settings in this menu.
Advanced settings
—Blacklist
In Blacklist, you can set the status of Blacklist. When Blacklist is set on,
incomings from numbers in the blacklist will be automatically rejected.
—Auto redial
You can set it on/off to activate or deactivate this function.
—IP dial
Set the prefix of IP numbers.
—Call time display
You can select whether to display call time or not.
—Call time reminder
In this menu you can set a fixed time or a time period to remind you
during your call.
—Auto quick end
This enables you to set auto quick end time during calling.
—Reject by SMS
When it is set on and there is an incoming, press Options to select this
function. The device will automatically reject the call and send a SMS to
the caller.
8.4.3 Dual SIM settings
You can select to use Dual SIM, SIM 1 only, SIM 2 only, or select Flight mode not to use any SIM.
8.4.4 Network settings
In this function, you can configure network settings for SIM 1 and SIM 2, including Network selection and
preferred networks.
8.4.5 Security settings
You can configure the security settings for Phone, SIM 1 and SIM 2 to protect your device or SIM cards
from unauthorized use. The preset password of Phone is 0000. Please revise it to be yours immediately.
-SIM1 security setup
SIM1 lock
This option makes you select whether to use PIN code or not. The preset PIN code is
1234. After three consecutive incorrect PIN code entries, the code will be locked, and
you need the PUK code
To unlock it
If you have activated SIM lock, you are required to input the PIN code each time you
power the device on to use the locked SIM card.