Katadyn MyBottle 8018087 User Manual

Summary of MyBottle 8018087

  • Page 1

    Katadyn products inc. 83 , switzerland phone: +41 44 839 21 11 info@katadyn.Ch www.Katadyn.Com print no. 8017667/1 contact international katadyn mybottle portable water purification system katadyn virupur replacement cartridge (model #8018087) en de fr nl dk swe nor fin it esp por pfäffikerstrasse 37...

  • Page 2

    Thank you for choosing the katadyn mybottle personal water purification system the katadyn mybottle water purification system eliminates the need to carry or locate safe water, whether you are camping, hiking, paddling, fishing or anytime safe water is required. The katadyn mybottle water purification s...

  • Page 3

    Key components important notes 1. In order to be purified, water must pass through the virupur cartridge. The flow rate is slower than an ordinary sports water bottle in order to ensure complete purification. 2. Squeeze and sip using continuous pressure. Do not pump. You will notice a 2– 4 seconds p...

  • Page 4

    3. Flush system (important!) before first use, flush system to remove harmless carbon dust from the postfilter. Fill bottle with water. Install bottle cap with assembled cartridge on bottle and tighten. Squeeze bottle tightly with both hands until water runs clear. The first squirt of water will be ...

  • Page 5

    Cartridge installation the mybottle virupur microbial purification cartridge is for use with mybottle water purification system. Each replaceable virupur replacement cartridge will treat up to 100 liters (26 gallons) of water. Checking the lifespan of the mybottle virupur microbial purification cart...

  • Page 6

    Changing the mybottle virupur microbial purification cartridge after 100 liters (26 gallons) or when bottle is hard to squeeze, use the following steps to change the mybottle purification cartridge: a. Remove the cartridge/bottle cap from the bottle. B. Remove the carbon postfilter and virupur cartr...

  • Page 7

    1 part ethanol and 1 part water and let it soak for 30 minutes to prevent bacterial growth. Remove. 4. Wash and dry bottle. Store empty bottle with cap on (without cartridges installed). 5. Allow all filter components to dry thoroughly. 6. Store virupur cartridge, plastic sleeve and carbon filter se...

  • Page 8

    Before you eat. Filter all drinking water with your katadyn mybottle water purification system. Product registration please take a moment to register your new katadyn product by completing the short product registration form online at www.Katadyn.Com/ productregistration. The information you provide...