- DL manuals
- Kathrein
- Receiver
- 260376
- Operating Instructions Manual
Kathrein 260376 Operating Instructions Manual
Summary of 260376
Page 1
Operating instructions kathrein radio satelliten receiver ufd 231 260376.
Page 2
Contents front, rear and remote control handset..................................................................................................... 3 displays, keys and connections .................................................................................................................. 4 t...
Page 3
Front, rear and remote control handset 3 front rear remote control handset.
Page 4
Displays, keys and connections 4 front 1 power switch (with supply isolation) 2 pushbuttons for program selection 3 two-line, 16-digit lcd display 4 jack for headphone connection 5 card slot for smart cards rear 1 power supply socket 2 data socket io for connection of an external infrared sensor and...
Page 5
Technical design details 5 • satellite receiving frequency range 950 - 2150 mhz • reception of digital (adr/dmx) and analog radio programs • smart card reader for dmx radio programs • 120 dmx program memory • 100 adr (free) program memory • 100 analog radio program memory • favorite mode for 200 pro...
Page 6
Adr radio programs 6 prog.- programm- programm- sat- polari- orbit- video- oszill. Audio- audio- platz name sparte frequ. Sation position hub frequ. Modus frequ. (kategorie) (mhz) gruppe (mhz) 1 bayern 1 general 11141 hor. Low 1 16 lo 1 stereo 6,12 2 bayern 2 general 11141 hor. Low 1 16 lo 1 stereo ...
Page 7
Dmx radio programs 7 progr- programm- progr. Sat- polari- orbit- video- oszill. Audio- audio- numm. Name sparte frequ. Sation position hub frequ. Modus frequ. (kategorie) mhz gruppe mhz 1 symphonic classic 11377 vert. Low 1 16 lo 1 stereo 7,74 2 chamber classic 11377 vert. Low 1 16 lo 1 stereo 7,92 ...
Page 8
Dmx radio programs 8 progr- programm- progr. Sat- polari- orbit- video- oszill. Audio- audio- numm. Name sparte frequ. Sation position hub frequ. Modus frequ. (kategorie) mhz gruppe mhz 50 51 52 deutsche schlager regional 10994 hor. Low 1 16 lo 1 stereo 8,10 53 deutscher rock regional 11171 hor. Low...
Page 9
Analog radio programs 9 progr programm sat- polari- orbit- video- osc. Audio audio- audio- platz name frequenz sation position hub frequ. Mode frequ. Deemp mhz mhz mhz 1 antenne bayern 11214 hor. Low 1 16 lo 1 stereo 7,38/7,56 dnr 2 deutsche welle 1 11229 vert. Low 1 16 lo 1 stereo 7,38/7,56 dnr 3 d...
Page 10
Favorite programs 10 programmbank 1 programmbank 2 programmbank 3 progr programm progr programm progr programm platz name platz name platz name 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7 8 8 8 9 9 9 10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 15 15 15 16 16 16 17 17 17 18 18 18 19 19 19 20 20 20 21 ...
Page 11
Safety and installation tips 11 1. Instructions ready carefully through the safety- and oper- ating instructions before switching the unit on. 2. Supply-voltage operate the receiver only from a supply volt- age of 230 v and 50 hz supply frequency. The unit is not be connected up to the supply before...
Page 12
Description of keys on remote control handset 12 1 this key switches the receiver into standby or back into operation again. Caution: no supply isolation. Note! If the receiver is switched into standby and the appropriate setting has been made in the initial setup menu, an automatic station search w...
Page 13
Receiver operation 13 the extensive equipping of this receiver permits reception of digital dmx pay-radio programs (with a card), free digital adr radio programs and also analog satellite radio programs. In the operating description that follows it is as- sumed that the receiver has already been pro...
Page 14
Receiver operation 14 analog radio programs to receive the analog radio programs press the "radio" key. The lcd display readout indicates "r .. " together with the most recently selected ra- dio program position. Information, such as that for the digital radio pro- grams (adr and dmx), is not availa...
Page 15
Receiver operation 15 headset the headset connection on the front is designed for a 6.3 mm stereo jack plug. The headset volume can be adjusted independently of the audio con- nections, if the mute key is used to turn off the sound at the audio connections. Adjustment of the balance and tone control...
Page 16
Receiver operation 16 further setting possibilities for the info displays are: 1. Step on through the info data manually with the ok key. 2. Info data running independently (scrolling) (the scroll interval is adjustable from 1 to 5 sec- onds). 3. Fade-in title and artist only. 4. Fade-in title and a...
Page 17
Connection and start-up 17 attention: do not connect the unit to the electrical supply until after all other installation work has been carried out in accordance with regulations • satellite signal connection connect the sat-if input of the receiver to the satellite receiving installation. If there ...
Page 18
Programming radio programs 18 the satellite receiver has been preprogrammed in the factory. The predefined programs are all listed on pages 6 to 9 (german)! More and more new programs are continually be- ing transmitted via the satellites. To program-in these new programs you can obtain the necessar...
Page 19
Programming radio programs 19 oscillator the receiver is preprogrammed with 4 different os- cillator frequencies (lo-settings) to allow matching to different feeder systems. This also allows prob- lem-free operation of the receiver with other feeder systems (receiving systems) that possibly use a di...
Page 20
Programming radio programs 20 search for adr- and dmx- programs to locate new adr- and dmx-programs the auto- matic search can be set up in the initial setup menu for the ufd 231 receiver (setting in the de- livered state). The automatic search is started if the receiver is switched into standby usi...
Page 21
Initial setting 21 the matching of the satellite receiver to the satel- lite receiving installation is carried out in the initial setup menu. The receiver has however already been factory- preprogrammed for standard satellite receiving installations changes to the initial settings are therefore only...
Page 22
Initial setting 22 lcd display language in this menu the lcd display language can be set up. The available languages are: german, english and french presetting: german program selection the unit allows you to enter the program number in one-, two- or three-digit form. Setting settable program positi...
Page 23
Initial setting 23 the following settings are possible: ⇒ 22 khz off, high/low or pos. 1/2 ⇒ tone burst 1) off, high/low or pos. 1/2 ⇒ full diseqc 2) off, on or remote mode 1) tone burst (simple diseqc) 2) full diseqc (to eutelsat specification) the setting is dependent on the receiving system that ...
Page 24
Technical data 24 hf range: frequency range: 950 - 2150 mhz input level range: 47 - 78 dbµv if band width: 27 mhz fm threshold: audio (digital) standard: iso/iec 11172-3 (mpeg-1/layer ii) audio carrier freq. Range: 0.18 - 8.82 mhz tuning: search, direct input and adjustable in groups bandwidth: 130 ...
Page 25
Menu structure 25 sat-frequency 11214 mhz polarization hor. Low orbit position 1 deviation 16 mhz open setup menu: press mode+radio radio program entry ---> (ok) mode stereo frequency 7,38 / 7,56 mhz assign entry ---> (ok) deemphasis dnr / 75 us program name "ant b" prog-no. R 1 ant b exchange entry...
Page 26
Menu structure 26 lnb-supply lnb-supply in stand by lnb voltage step-up language open initial setup menu general-menu entry-->(ok) program selction lo 1 09750 mhz lo 2 09750 mhz oscillator-menu entry--> (ok) lo 3 9750 mhz lo 4 9750 mhz 22 khz signal diseqc-menu entry--> (ok) tone burst full diseqc s...
Page 27
Menu structure 27 tta-scroll-line interval: 2 sec title artist album tta-data-menu mode + info author cd-number radio-text off/on off/on 1...5 sek. Call-up and activate with ok return with back info-menu not possible in radio mode separetely adjustable for adr- and dmx-mode not available in dmx-mode...