Kathrein HTZ 15 Manual - Htv 15/115
Wall Mount HTZ 15 for LCD/TFT Monitor
HTV 15/115
Mounting instructions
1. Mark the holes on the wall using the fastening
angle.
2. Drill the holes.
3. Fasten the bracket to the wall.
(Observe the safety instructions!)
internet: http://www.kathrein.de
KATHREIN-Werke KG x Telephone: +49 80 31 1 84-0 x Fax: +49 80 31 1 84-3 06 x Anton-Kathrein-Straße 1-3 x PO Box 10 04 44 x D-83004 Rosenheim x Germany
Base plate acc. to
VESA standard
Safety screw
M5 x 10
2 Tilt screws
M5 x 12
5. Hook the screen on the wall-bracket.
6. Lock the screen in place by tightening the safety
screw.
7. Tilt the screen in the desired position and tighten
the tilt screws.
4 thread producing screws M4 x 25
Ø 6mm
4 Spacers
Ø5/Ø10x10
9
3
6.
2
47
2/
D
/1
1
04/
E
/Z
W
T
S
u
bj
e
ct
to
t
ec
h
ni
cal
a
lte
rat
ion
s!
4. Fasten the base plate on the rear of the screen
by means of the supplied screws and spacers.
Place the monitor on a solid support when fas-
tening the wall mount. Watch out that the LCD
screen is not bashed in or damaged due to un-
evenness of the support.
There are no threads on the rear of the TV set, only transit
sheets without threads. The thread is produced when
screwing in the screws. Make sure that the screws are not
edged and be screwed in vertically.