1. DL manuals
  2. Kathrein
  3. Receiver
  4. UFD 506
  5. User Manual

Kathrein UFD 506 User Manual

Manual is about: Kathrein DVB Satellite Receiver User's guide

Summary of UFD 506

  • Page 1

    User's guide dvb satellite receiver ufd 506 ufd 506/s ufd 516 ufd 516/s.

  • Page 2

    2.

  • Page 3: Foreword

    Foreword 3 foreword dear customer, this user's guide is designed to help you to use the extensive func- tions of your new satellite receiver most effectively. We have made every effort to make the instructions as clear and un- derstandable as possible and to keep them as short as necessary. You will...

  • Page 4: Contents

    Contents 4 contents foreword .......................................................................................................................................................... 3 contents ............................................................................................................

  • Page 5: Contents

    Contents 5 reception of encrypted channels ............................................................................................................. 31 video recorder connection .........................................................................................................................

  • Page 6: Safety Information

    Safety information 6 safety information electronic equipment is not household waste - in accordance with directive 2002/96/ec of the european parliament and the council of 27th january 2003 on used electrical and electronic equipment, it must be disposed of properly. At the end of its service life, ...

  • Page 7: Back Panel and Connections

    Back panel and connections 7 back panel and connections you will find the following connections on the back panel of the re- ceiver: 230 v/50 hz connect the mains lead with the mains socket audio l and r audio output, left and right channel for connection to a stereo system tv using the scart cable ...

  • Page 8: Operation From The Front

    Operation from the front 8 operation from the front the receiver has an on/off switch with mains disconnection. The channel number is displayed on a 4-digit green 7-segment dis- play. Display of tv programmes (prefixed “t” instead of “p” = tv mode) display of radio programmes display t = tv mode (an...

  • Page 9

    Functions of the remote control 9 functions of the remote control you switch the receiver on from stand-by with the red button or with a numerical button [ 0 ]-[ 9 ]. The buttons [◄] [►] and [▲] [▼] arranged around the [ok] button have control functions (cursor/bar) in the menus. Button designation ...

  • Page 10: Channel Selection

    Channel selection 10 channel selection channel selection by number buttons [p+], [p-] and list you set the channel by direct entry of the channel number with the number buttons (0 is also a channel number). You switch on/back to the next/previous channel with the [p+]/[p-] but- tons. A list sorted a...

  • Page 11: Channel Selection

    Channel selection 11 the radio channels are organized identically, i.E. There is a separate channel pool for 2,000 radio storage places and a further 10 associ- ated radio favourite banks with 1,000 places each. Note: please note that after a satellite, transponder or manual search, the newly found ...

  • Page 12: Channel Selection

    Channel selection 12 satellite 1 = astra 19 “~ ~~~~~~~” satellite 2 = hotbird 13 “~~ ~~~~~~” etc. When alphabetically sorted, the placeholder channels appear at the end of the list. . . . . P095 channel xxx p096 channel yyy p097 channel zzz p098 ~~~~~ p099 ~~~~~ p100 premiere start p101 premiere 1 p...

  • Page 13: Channel Selection

    Channel selection 13 digital output the receiver has an audio output for the ac 3 format (dolby digital). Thus you have the possibility of bringing cine sound into your living room. Connect the digital audio output only with a corresponding sys- tem. Observe in any event the operating instructions o...

  • Page 14: Channel Selection

    Channel selection 14 digital output in the right window you see in each case the current signal status at the digital output (= digital cinch socket). If “pcm“ is displayed, then the digital signal is coded in the pcm for- mat. If “ac 3” is displayed, then the audio signal is coded in the dolby digi...

  • Page 15: Channel Selection

    Channel selection 15 r e c timer the “timer programming” menu is selected in the main menu under item 5. Up to 8 timer events can be entered optionally with tv or radio channels. Note: please note that in the selection “vcr record = standard” the video recorder must also be set to identical recordin...

  • Page 16: Channel Selection

    Channel selection 16 [ok] and delete the programmed data with the [ok] button. Note: if you have deleted a line inadvertently and want to restore the original information, exit the timer menu by pressing the [exit] button twice. Note: time and date are taken from the dvb data transmitted by the broa...

  • Page 17: Channel Selection

    Channel selection 17 you can switch forwards or backwards line by line or page by page to the desired programme with the [▼] [▲] or [►] [◄] but- tons. Once you have selected the programme you want, you can call up further detailed information with the [ok] button. You receive a corresponding message...

  • Page 18: Menu Structure - Channels

    Menu structure - channels 18 menu structure - channels read these lines carefully and observe all screen instructions. Favourite bank you select one of the favourite banks 0-9 with [fav] and [▼▲]. Functions in the channel database you select the main menu with the [menu] button and press the [ok] bu...

  • Page 19: Menu Structure - Channels

    Menu structure - channels 19 you select a favourite bank with [fav] (fa) [▼] [▲]. You select a satellite with [menu] (me) and [▼▲]. You select the channel source with [text] (te) and [▼▲]. You move the channel you want into the file with the [pip] button (= remove – green arrow). You insert the remo...

  • Page 20: Menu Structure - Channels

    Menu structure - channels 20 buttons. After you have entered the name you want, the input field is deacti- vated again with [ok]. Channel pool the channel pool contains all channels in alphabetical order. You make the selection according to satellites with the [menu] button, the selection according ...

  • Page 21: Menu Structure - Channels

    Menu structure - channels 21 f.142 display of the field strength (adjustable with p+ button) e. 34 display of the reception quality (adjustable with p- button) the period after e or f shows that the front end is engaged and a digi- tal signal is received. Parental control the five-digit parental con...

  • Page 22: Menu Structure - Channels

    Menu structure - channels 22 thus overcoming parental control, e.G. By deleting the mark or setting the locked channels by the transponder search run, is excluded (the lock can also not be overcome via timer). Note: to deactivate parental control only briefly, e.G. In the evening, you can switch the...

  • Page 23: Menu Structure - Channels

    Menu structure - channels 23 transponder search run all channels of a transponder are searched for in the transponder search run. If the parameters (satellite, frequency, polarization, symbol rate) of the searched for channel are known, the transponder search run can be used. For instance, if a new ...

  • Page 24: Satellites Menu

    Satellites menu 24 satellites menu the astra satellite is set ex works. Further seven satellites, e.G. Eutelsat/hotbird, are pre-programmed. On extension of your re- ception system you can make the required settings for the pre- programmed seven satellites in the “satellite selection” menu. You acti...

  • Page 25: Installation Menu

    Installation menu 25 installation menu factory setting after you enter the following number combination in the “parental control” menu, you can undo changes in the unit settings again and reset your receiver to the condition on delivery (factory setting). Select the “change pin” menu m button > chan...

  • Page 26: Installation Menu

    Installation menu 26 the offset for the mez summer time is {+2} hours, for the mez winter time {+1} hour. Please check and correct the “time adjust” at the first start-up and in each case on the time change in spring and autumn. Select the time offset with the number [1] or with the [▼] [▲] buttons,...

  • Page 27: Installation Menu

    Installation menu 27 selecting the character set automatic switchover of the character set is defined in the dvb stan- dard. Unfortunately not all broadcasting stations keep to this stan- dardization, so that characters from an incorrect character set can ap- pear in a text. Automatic character set ...

  • Page 28: Installation Menu

    Installation menu 28 the automatic adjustment of the picture width functions only if the tv set can process and display 16:9 format (6-volt switching voltage). Vcr record two different modes for the vcr scart socket are available for auto- matic vcr recording with the timer function (see respective ...

  • Page 29: Installation Menu

    Installation menu 29 power supply in a corresponding multi-subscriber system. Diseqc (digital satellite equipment control) the control signals must be set according to the requirements of your satellite system in the diseqc tm menu. 22 khz signal {off} 22 khz not active {high/low} 22 khz switches be...

  • Page 30: Installation Menu

    Installation menu 30 if the receiver is used for the first time with a ufo micro recep- tion system, then delete the previously allocated address. You do this in the “ufo micro” menu item by selecting “reset” using the [◄] / [►] buttons and [ok]. The receiver is allocated the original factory settin...

  • Page 31: Installation Menu

    Installation menu 31 attention download software version: vx.X download software version: vx.X continue? Ok = yes ex = no or channel lists), you can select an item on the data carou- sel. E) after selection 1 “receiver software” the following menu is displayed: f) after you press the [ok] button a v...

  • Page 32: Installation Menu

    Installation menu 32 a) via satellite search run search: you start the automatic station search (see respec- tive menu item) with the selection “ca” (= search according to encrypted channels). This way you re- ceive all encrypted channels of the selected satellite in the “favourite list” menu under ...

  • Page 33: Video Recorder Connection

    Video recorder connection 33 video recorder connection you connect your video recorder by means of the scart cable with the receiver (vcr socket). Recording for vcr recording (record), the satellite receiver must be switched on or the timers must be pre-programmed (see “timer settings” sec- tion). P...

  • Page 34: Technical Data

    Technical data 34 technical data channels • in each case 2,000 storage places for tv and radio channels • 10 individually assignable favourite banks with 1,000 channel places in each case (e.G. For channel sectors of sport, news, music etc.) • 8 satellites (can be activated individually) • 24 charac...

  • Page 35: Technical Data

    Technical data 35 rf range • sat if frequency range 950–2150 mhz • input level ranges 43–83 dbµv • reception threshold (eb/no) digital tv system • modulation, fec, demultiplexer dvb-s standard • video resolution ccir 601 (720 x 576) • input data range 2–45 ms/s • bit rate 1.5–15 mbit/s • video (volt...

  • Page 36: Glossary

    Glossary 36 glossary band frequency band of a satellite: low-band and high-band ca conditional access stands for encrypted channels cvbs composite video burst sync: german fbas signal (colour / picture / blanking / synchro- nous signal video standard for tv or vcr devices) diseqctm digital satellite...

  • Page 40

    Internet: http://www.Kathrein.De kathrein-werke kg x tel. (0 80 31) 18 40 x fax (0 80 31) 18 43 06 anton-kathrein-straße 1-3 x postfach 10 04 44 x d-83004 rosenheim 936.2645/a/0505/zwt- te chnical alterations reserved!.