1. DL manuals
  2. Kathrein
  3. Receiver
  4. UFE 335
  5. Operating Manual

Kathrein UFE 335 Operating Manual

Manual is about: DVB Satellite Receivers

Summary of UFE 335

  • Page 1

    Operating manual dvb satellite receivers ufe 335/335s - 336/336s order no.: 20210028/20210029 – 20210030/20210031 new.: 20210036/20210037 - 20210038/20210039.

  • Page 3: Preface

    Preface 3 preface dear customer, the following operating manual will help you obtain the best possible use from the extensive features of your new satellite receiver. We have written this operating manual as comprehensibly as possible and as concise as necessary. A brief lexicon containing specialis...

  • Page 4: Contents

    Contents 4 contents preface.............................................................................................................................................................. 3 contents ..........................................................................................................

  • Page 5: Contents

    Contents 5 general..................................................................................................................................................... 33 reception of encrypted programmes ..................................................................................................

  • Page 6: Safety Instructions

    Safety instructions 6 safety instructions important notes regarding operation the following section contains important information relating to the operation, place of installation and connection of the receiver. Read these notes carefully before putting the unit into operation. Extended absence / th...

  • Page 7: Safety Instructions

    Safety instructions 7 grounding the parabolic antenna is to be grounded in accordance with regula- tions. The relevant local and/or german vde regulations are to be complied with here. Important notes for siting and installation. Place of installation every electronic device generates heat. The rise...

  • Page 8

    Connections, operation and displays 8 connections, operation and displays the following connections are found on the rear panel of the receiver: 230v / 50 hz connect the mains cable with the mains socket. Audio tv l a. R audio output, left and right channel for connection to a stereo system. Tv conn...

  • Page 9: Operation

    Operation 9 operation local control open (and close) the flap on the front panel of the unit by applying pressure on the dotted area (left). The local operation consists of the buttons, [standby], [▲] and [▼] for switching programmes (ascending/descending), as well as [ - ] and [ + ] for adjusting t...

  • Page 10: Functions of Remote Control

    Functions of remote control 10 functions of remote control in standby, the receiver is switched on by pressing the red button or the numerical buttons [0]-[9]. The [◄] [►] and [▲] [▼] buttons, which are arranged around the ok button, possess the volume control function –/+ (vol -/+) and the programm...

  • Page 11: Functions of Remote Control

    Functions of remote control 11 keep the button “rc” pressed. Use the numbered buttons to input “902”. In order to confirm the code, press “rc” , then switch receiver 2 to standby by pressing and then switch back on again. Also switch on receiver 1. Keep the button “rc” pressed and use the numbered b...

  • Page 12: Programme Selection

    Programme selection 12 programme selection programme selection with the numerical buttons [0]-[9], [▲], [▼] and list the programme setting is carried out by direct entry of the programme number with the numerical buttons (0 is also a programme number). With the [▲]/[▼] buttons, you can switch back/f...

  • Page 13: Programme Selection

    Programme selection 13 programme management with 10 favourite lists digital television technology offers viewers a variety of programmes. Depending on the number of received satellites, up to 2,000 tv and radio programmes are at one’s disposal. In order to control such an enormous array of programme...

  • Page 14: Programme Selection

    Programme selection 14 information for switching programmes this display bar appears every time you switch programmes – it is displayed on the screen for approx. 3 seconds. It contains the follow- ing information: - favourite list - programme slot and name - if several audio and language channels ar...

  • Page 15: Programme Selection

    Programme selection 15 volume settings a) the volume of the receiver can be set in 20 steps with the [◄] or [►] button. The current volume status appears in the programme display. B) [ : ] sound on/off (mute) – for „sound off,“ a respective osd sym- bol is displayed for ca. 2 seconds. The function „...

  • Page 16: Programme Selection

    Programme selection 16 timer the „timer programming“ menu is called up by pressing the [Ÿ] button. Up to 8 timer events can be alternatively entered in with tv or radio programmes. Note: keep in mind that the video recorder must be identically set to the same recording times. Note: please note that ...

  • Page 17: Programme Selection

    Programme selection 17 the data from the programme preview can be transferred to the re- cording timer by pressing only one button. If the programme preview is available, then select the desired programme and transfer the data directly to the timer by pressing the [Ÿ] button. Deleting a timer progra...

  • Page 18: Programme Selection

    Programme selection 18 [ i ] activates the basis navigator, displays information about cur- rent programme. [ok] calls up the programme preview. Depending on the programme provider, you can receive pro- gramme lists for the current day or the next several days. You can switch to the desired programm...

  • Page 19: Menu Structure

    Menu structure 19 menu structure programmes favourite list with the [m] button, call up the main menu and then press the [ok] button twice. You can sort, exchange, copy and delete programmes – all in one menu. [ i ] select one of the favourite lists 0-9. [m] select the satellites (e.G. Astra, eutels...

  • Page 20: Menu Structure

    Menu structure 20 [tv] select the programme source (e.G. New or all programmes). [▼] [▲] select the targeted position in the favourite list (point of the blue arrow). [◄] [►] select the programme from the source-programme list (in the right window). The programmes are arranged in alphabetical order....

  • Page 21: Menu Structure

    Menu structure 21 place it in the centre field with the [ : ] button. Select the desired programme number with the [▼] [▲] buttons or [0-9], and add the programme by pressing [ a ] – finished! Deleting: move the programme, you would like to delete, to the red bar by using the [▼] [▲] buttons (or by ...

  • Page 22: Menu Structure

    Menu structure 22 here the setting focus is also switched to the left or right window, which means that the programme, whose programme name is dis- played in yellow writing, is set. You will see the respective picture in the currently selected window by each action, either copy, exchange or delete. ...

  • Page 23: Menu Structure

    Menu structure 23 press the [ok] button – finished! Note: if the unit recognises programmes, which are already in the current favourite list, the following message appears above the [ok] symbol: note: if you have accidentally deleted programmes, or want to restore changes, then exit the menu by pres...

  • Page 24: Menu Structure

    Menu structure 24 with the [f] button and (within 2 seconds) with the [◄] or [►] button, the transparency of the screen display can be changed. The satellite is selected by pressing the [m] button. [tv] selects free-to-air or encrypted programmes. (:) after pressing the [mute] button, individual pro...

  • Page 25: Menu Structure

    Menu structure 25 re-enter the new pin. Attention! Do not forget your pin. Resetting the unit to the factory setting is only possible at the service centre esc. All the programmes are unlocked at the factory – you can lock each individual programme against unauthorised setting. To mark the programme...

  • Page 26: Menu Structure

    Menu structure 26 search satellite search the satellite search occurs via all frequencies of the selected satellite. Select the desired settings in the order of the menu: the selection of individual parameters is carried out after activation with the [ok] button and then with the [◄] or [►] buttons....

  • Page 27: Menu Structure

    Menu structure 27 transponder search in the transponder search, all programmes of the transponder are searched for. If the parameters (satellite, band, symbol rate, free s.Rate) of the searched programme are known, then the transponder search can be used. If e.G. A new programme is added to a known ...

  • Page 28: Menu Structure

    Menu structure 28 activate the desired satellite number, e.G. With the numerical buttons [1]-[8], and call up the entry menu by pressing the [ok] button. 1. Enter or change the name. Activate the entry field {name} by pressing the [1] button and [ok]. With the [▼] or [▲] button, you can select lette...

  • Page 29: Menu Structure

    Menu structure 29 installation time offset after switching the unit on via the mains switch or after a power failure, the time and date for the timer is taken from the received data. In order for the time and date of the receiver to comply with the current local time, the deviation from the normal t...

  • Page 30: Menu Structure

    Menu structure 30 signal paths activating and changing individual fields is carried out as follows. Select the desired entry field {xyz} with [0]-[9] or [▼] / [▲] and activate the field by pressing [ok]. The parameters are set with the [▼] or [▲] button. With [ok], the selection is completed. Tv–sca...

  • Page 31: Menu Structure

    Menu structure 31 ceiver supplies the lnb with power even in standby. The power con- sumption of the receiver can increase from typically 2 watts to up to 10 watts in standby. {on} in standby the lnb voltage remains switched on, e.G. For supplying power in a system with several subscribers. Diseqc (...

  • Page 32: Menu Structure

    Menu structure 32 (2) remote freq. {xxxx} (3) “ufo ® micro” {off}/{on} with the [m] button, access the main menu. The desired submenus are activated by pressing the numerical buttons [1]-[x] or the programme buttons [▼]/[▲]. The selected submenu is then outlined in colour, and the respective help te...

  • Page 33: Menu Structure

    Menu structure 33 f) after pressing the [ok] button, a version check is carried out. If an older version is found on the data carrousel, a cor- responding message appears. If necessary, you can cancel the download at any time. This information is defined by the cam or smartcard, i.E. It does not com...

  • Page 34: Menu Structure

    Menu structure 34 call up various information via your ca modules and smartcards. The amount and content of this information is determined by the cam or smartcard, and does not come from the receiver. Please refer to the instructions and documents from your service provider. Reception of encrypted p...

  • Page 35: Glossary

    Glossary 35 glossary band frequency band of a satellite low-band and high-band ca (conditional access) stands for encrypted programmes cvbs composite video burst sync: video standard for tv or vcr units diseqc digital satellite equipment control dvb digital video broadcast epg electronic programme g...

  • Page 36: Technical Data

    Technical data 36 technical data programmes • 2,000 memory positions for tv and radio programmes • 10 individually occupied favourite lists, each with 1,000 programme positions (e.G. For programme categories, sport, news, music etc.). • 8 satellites (can be individually activated) • 24 characters fo...

  • Page 37: Technical Data

    Technical data 37 rf range • sat if frequency range 950–2150 mhz • input level ranges 43–83 dbµv • reception threshold (eb/no) tv system digital • modulation, fec, demultiplexer dvb-s standard • video resolution ccir 601 (720 x 576) • input data rate 2–45 ms/s • bit rate 1.5–15 mbit/s • video (volta...

  • Page 39

    Internet: http://www.Kathrein.De kathrein-werke kg x telephone ++49 (80 31) 18 40 x fax ++49 ( 80 31) 18 43 06 anton-kathrein-straße 1-3 x p.O.B 10 04 44 x d-83004 rosenheim, germany 9362247/0502/schw, technische Ä nderungen vorbehalten! 998.7070/0/0203/ zwt-technical data subject to change!.