Focusing screen installation guide for the canon 350d, 400d, 450d, 500d, 1000d (rebel xt, rebel xti, rebel xsi, rebel t1i, rebel xs) ©2006 katz eye™ optics august 29, 2009.
Installation guide: canon 350d, 400d, 450d, 500d, 1000d (rebel xt, xti, xsi, t1i, xs) thank you very much for your purchase of a katz eye™ focusing screen. This document provides installation instructions for the canon 350d, 400d, 450d, 500d & 1000d. While these instructions are based on a 400d inst...
4. Place a folded pec-pad or lens cloth against the reflex mirror for protection. The pad is not used in these illustrations for clarity of view. While this step is not absolutely necessary, it is a good general precaution. To minimize introduction of dust into the camera, it is also very helpful to...
7. Tip the camera so that the focusing screen falls toward the main mirror. Grasp the screen by one of the nearest tabs and lift out the focusing screen. Be very careful to touch only the tab, so the screen face does not become damaged! Store the screen in a safe place, such as wrapped in a lens clo...
9. Remove the bagged katz eye™ screen from the plastic case. Orient the screen so that the protruding prism is facing you. Grasp the katz eye™ focusing screen by its handling tab and withdraw from the protective bag. Be very careful to touch only the tab, so the screen faces do not become damaged! C...
11. Insert the retainer clip into the camera. Be sure the two tabs at the rear of the clip engage the matching notches in the frame. Click photo to enlarge click photo to enlarge 12. Press the retainer clip gently toward the top of the camera until it engages. It is important not to catch the mirror...
©2006 katz eye™ optics page 7 august 29, 2009 technical support technical support is available by email to customerservice@katzeyeoptics.Com . We strive to return all emails within 24 hours. Technical support is also available by phone at +1.413.743.2523 between the hours of 8:00am and 6:00pm easter...
