1. DL manuals
  2. Kawasaki
  3. Paint Sprayer
  4. 691307
  5. User manual

Kawasaki 691307 User manual

Manual is about: HVLP GRAVITY FEED SPRAY GUN AND CUP INSTRUCTION MANUAL

Summary of 691307

  • Page 1

    For customer service pour le service aprÉs vente ou du consommateur para el servicio para el consumidor 1-800-590-3723 printed in china this manual contains important information regarding safety, operation, maintenance and storage of this product. Before use, read carefully and understand all cauti...

  • Page 2

    Introduction this spray gun is designed for household use only and is not intended for com- mercial applications. It is well suited for do-it-yourselfers with a variety of home uses. This instruction manual is intended for your benefit. Please read and follow the safe- ty, installation, maintenance ...

  • Page 3

    Do not operate this spray gun if damaged during ship- ment, handling or misuse. Damage may result in bursting, which can cause serious injury or property damage. All damaged parts must be repaired or replaced as needed prior to operating this spray gun. Check to see that all nuts, bolts and fittings...

  • Page 4

    Safety rules for spray guns risk to breathing • spray materials may be harmful if inhaled, or if there is contact with the skin. Adequate exhaust must be provided to keep the air free of accumulations of toxic materials. For toxic vapors produced by spraying certain materials can create intoxication...

  • Page 5

    Installation and location do not place spray gun in an area: • where there is evidence of oil or gas leaks. • where flammable gas vapors or materials may be present. • where air temperatures fall below 32ºf or exceed 104ºf. Functional description operating the spray gun never aim or spray at yoursel...

  • Page 6

    Adjustments • the direction of the fan (horizontal or vertical) can be changed by loosening the air cap nut and turning the air cap 90 degrees. Hand tighten air cap nut after adjustment. • amount of material released (density of “fan spray”) is controlled by fluid control knob. Turn knob countercloc...

  • Page 7

    4. Trigger the gun properly. Start the gun moving at the beginning of the stroke before squeezing the trigger and release the trigger before stopping gun movement at the end of the stroke. This procedure will blend each stroke with the next without showing an overlap or unevenness. Spray pattern may...

  • Page 8

    Do not use lubricants containing silicone. Silicone may cause defects in the finish application. All parts on a spray gun should be screwed in by hand at first. This will avoid the possibility of cross threading the parts. If the parts cannot be turned by hand easily, make sure you have the correct ...

  • Page 9

    Parts list no. Part no. Description qty. Parts diagram parts list no. Part no. Description qty. 15 16 11 691307-11 trigger seat 1 12 691307-12 oxhide gasket 1 13 691307-13 o-ring 2.4x1.8 1 14 691307-14 guide bolt 1 15 691307-15 locking spring 1 16 691307-16 air cap nut 1 17 691307-17 air cap gasket ...

  • Page 10

    Parts list no. Part no. Description qty. Specifications specifications air pressure 30-50 psi air consumption 4.2-7.1 cfm fluid nozzle size 1.44mm (0.057 in.) feed type gravity mix type external bleed type non-bleeder air inlet 1/4 in. Nps cup size 600ml (0.160 gal) 17 1 year limited warranty expres...

  • Page 11

    Returned within the first 30 days after the purchase date will be replaced; for items returned after the first 30 days and within the warranty period, covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced, at alltrade’s option. During the warran...