1. DL manuals
  2. Kawasaki
  3. Grinder
  4. 840078
  5. Instruction Manual

Kawasaki 840078 Instruction Manual

Manual is about: 8" BENCH GRINDER

Summary of 840078

  • Page 1

    Model #840078 8" bench grinder instruction manual for customer service pour le service aprÉs vente ou du consommateur para el servicio para el consumidor 1-800-590-3723 printed in china 87-1904-60957 kawasaki™ is a trademark licensed by kawasaki™ motors corp., u.S.A., which does not manufacture or d...

  • Page 2

    Congratulations! Thanks for choosing this product. At alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our customer service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly ...

  • Page 3

    General safety rules – for all electric power tools read and understand all instructions. Failure to follow all instruc- tions listed below may result in electric shock, fire and/or serious personal injury. Keep guards in place and in working order. Remove adjusting keys and wrenches. Form a habit o...

  • Page 4

    Extension cord usage extension cords are not recommended for use with this bench grinder. Extension cords, if used, must be properly grounded with a 3-prong plug on one and a 3-hole receptacle on the other. Do not use grounding adapters with an extension cord. Extension cords must be ul listed and u...

  • Page 5

    Do not stand directly in front of the grinder when it is first turned on. Loose fragments could fly off at high speeds possibly causing injury. Never engage a work piece to a cold grinding stone. A cold grind- ing stone has a tendency to chip. Allow the grinder to run for an entire minute before app...

  • Page 6

    Functional description controls and components: 1. Grinder 2. Eye shield (2) 3. Eye shield knob(2) 4. Left side eye shield bracket 5. Right side eye shield bracket 6. Left side tool rest 7. Right side tool rest with v-groove 8. Flexible work lights (2) 9. On/off switch 10. 7 watts, 120v lamp (2, not...

  • Page 7

    Installation instructions do not begin assembly of bench grinder if the ac power cord is plugged into an ac power receptacle. Do not begin assembly of bench grinder if power switch on the front of the base is switched to the “on” position. Inspection: carefully inspect each individual part of the be...

  • Page 8

    Operating the on/off switch the bench grinder “on/off” switch is located on the front of the grinder base. To turn the grinder “on,” move the rocker-style switch to the right to the “on” position. To turn the grinder “off,” move the rocker-style switch to the left to the “off” position. Grinder oper...

  • Page 9

    4. Remove the rear bolt attaching the tool rest to the grinding wheel guard. 5. Loosen the front bolt on the tool rest. Move the tool rest forward as far from the grinding shield guard as possible and re-tighten. 6. Wedge a small piece of wood between the grinding wheel guard and the grinding stone ...

  • Page 10

    18 17 8. Remove the outer arbor flange (5) and the old grinding wheel. 9. Slide the new grinding stone onto the motor spindle and ensure it seats with the inner arbor flange (7). Install the outer arbor flange (5) and the arbor nut (4). 10.Wedge a small piece of wood between the tool rest and the gr...

  • Page 11

    Component thereof is modified or altered. This warranty does not apply to any other product and/or component thereof manufactured or distributed by alltrade, and does not apply to products and/or components thereof designed, manufactured and/or assembled by others, for which alltrade makes no warran...

  • Page 12

    Purpose. No warranty, oral or written, other than the above warranty is made with regard to this product. All express and/or implied warranties, guaranties and/or representations by alltrade and/or its representative(s) regarding the design, manufacture, purchase, use and/or operation of the product...