Kawasaki K10400-040 Assembling Instructions
Installation Instructions
Assembly Instructions
Description:
iPod® Adapter Cable
MP3/Audio Adapter Cable
Model:
Vulcan 1700 Voyager
Part Number:
K10400-040
K10400-041
Approximate
Assembly Time:
15 min.
Before you begin installation, read through the installation instructions and check to be sure all parts are
present.
If you are in doubt as to any part of the installation, please ask your authorized Kawasaki dealer to
complete the installation. Please note that Kawasaki cannot assume any responsibility for damage
resulting from incorrect installation.
Parts List
Seq.
Description
Qty
1.
iPod® Adapter Cable (K10400-040 only)
1
2.
Cushion
1
3.
MP3/Audio Adapter Cable (K10400-041 only)
1
Installation
Install cable
z
Open left fairing pocket and locate the vehicle harness with
dual plug connectors. One plug is triangular 3-pin and the
other is square 4-pin.
z
Connect your adapter cable to the mating vehicle harness
connectors. You will use both connectors for an iPod adapter
cable and the 3-pin connector only for the MP3/media adapter
cable.
Attach cable
Connect your media player to the adapter cable as follows:
z
The iPod connects to the large flat receptor (Apple® refers to
this as a 30-pin dock connector) at the bottom of the device.
z
Insert the iPod charging module into the space provided in the
cushion.