Kawasaki NINJA 650R User's Manual And Installation Instructions - page 2
6. Upper Cowling (After disconnecting the turn signal wires and headlamp
connectors)
7. Main Cowling Panels left and right side
8. Main Cowling Inner Panels left and right side
9. Headlight Assembly
The pictures in the Modification section of this guide are taken from Kawasaki FAR; it’s a good
place to start. If you have the kits, install them as per the pictures. Unfortunately for some
people (myself included) just installing the kit did not completely eliminate the problem. If you
want to carry out further work and be sure of a complete cure, then follow the suggestions in the
Additional Information section of this guide.
Keep all hardware (hex screws, washers, spacers, nuts and bolts) in order, separated and
labeled, some parts although similar in appearance are in fact of different lengths (bolts) and
thicknesses (washers).
Use care with painted and plastic parts, they are easily damaged. Work inside in a clear and well
lit area. Store items carefully and out of harms way when they are not being worked on.
1. Windshield
Remove the four hex screws and clear plastic washers that secure the windshield to the upper
cowling. Tilt the windshield forward to disengage the tang at the front.