Kawasaki Z250SL Owner's Manual - Note
of
152
100
j
Coolant Filling
•
Remove the quick rivets.
A. Quick Rivets (Pin Type)
B. Quick Rivet (Screw Type)
NOTE
○
The middle fairing uses the quick
rivet (pin type). The quick rivet can
be removed by pushing the center
pin into the quick rivets, and when
installing it, pull the center pin fully
up first, and then push into the center
pin after inserting it.
○
The middle fairing uses the quick
rivet (screw type). The quick rivet
can be removed by loosening the
center screw, and when installing it,
tighten the center screw after insert-
ing it.
Quick Rivet (Pin Type) Removal
A. Quick Rivet
B. Center Pin
C. Push in.