Kaz HY-254 SeriesHY-280 Series Owner's Manual

Summary of HY-254 SeriesHY-280 Series

  • Page 1

    Important safety instructions read and save these safety instructions before using this fan when using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: for us models only – this product empl...

  • Page 2

    16. A loose fit between the ac outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet. 17. Do not operate any fan with a damaged cord or plug. Discard any damaged fan, return the fan to the retailer where the f...

  • Page 3

    A. Pedestal assembly • line up the left and right pedestal assembly and firmly snap together (fig. 1). B. Base assembly • align the two portions of the circular base and snap together by gently pushing the 4 extrusions (fig. 2, item a) into the adjacent circles of the connecting piece (fig. 2, item ...

  • Page 4

    On/off to turn fan on, press the power button ( ) located on the left side of the control panel. Speed control the fan will automatically start on “sleep” speed when initially turned on. To adjust the speed up or down, press the fan speed button ( ) repeatedly to increase level. Oscillation to activ...

  • Page 5

    On/off to turn fan on, press the power button ( ) located on the left side of the control panel. Current room temperature will be displayed whenever fan is on. Speed control the fan will automatically start on “sleep” speed when initially turned on. To adjust the speed up or down, press the fan spee...

  • Page 6

    On/off press the power button ( ) once to turn the fan on. Press the power button a second time to turn the fan off. Speed control the fan will automatically start on “sleep” speed when initially turned on. To adjust the speed up or down, press the fan speed button ( ) repeatedly to increase level. ...

  • Page 7

    Temperature mode can be accessed through the remote control. A. Press the temperature mode button ( ) once and release. Display will begin to flash. B. Press the “+” and “-” buttons to change the setpoint. Note: once the setpoint is selected, the fan speed will adjust automatically to achieve the de...