KCS 62CC Owner's Manual

Manual is about: Petrol Engine fully CNC machined

Summary of 62CC

  • Page 1

    Engine kcs 62 cc veryimportantremark!!!! Pleasereadandfollowthebreak-in proceduresfromthismanualcarefully. Thekcs62ccisdifferentfromother enginesofthisclass.Otherwise,itwill leadtoinjuryordamage. Owner’s manual.

  • Page 2: Safety Instructions

    Kcs 62cc manual 1 safety instructions warning! This motor can cause severe harm to you, and/or others, if misused or if these safety precautions and instructions are not observed. Kcs engine is not responsible for any loss, injury or damage resulting from the miss-use of its products. You alone are ...

  • Page 3: Motor Installation

    Kcs 62cc manual 2 fuel pumps, battery chargers, etc. Do not allow smoking in the area of your fuel supply or motor. Store fuel in approved containers and well ventilated areas. • allow the motor to cool before touching or fueling. • always flip the prop a few revolutions after running the motor to d...

  • Page 4: Ignition System

    Kcs 62cc manual 3 through the cylinder fins. Allow an outlet opening approximately 2 1/2 times larger than the intake at the bottom rear of the cowl for the hot air to escape. Without this outlet opening, air won't flow through the cowl. • air ducts can be made from thin plywood, balsa, fiberglass, ...

  • Page 5: Recommended Props

    Kcs 62cc manual 4 • the kcs engine ignition is designed to spark only when the prop is flipped at a high speed. If the prop is not turned over at "starting" speed, the ignition will not fire. This helps to prevent the motor from firing accidentally. Unless you are having problems starting the motor,...

  • Page 6: Fuel And Oil Mix

    Kcs 62cc manual 5 fuel and oil mix • use premium pump gas, such as 91 to 93 octane. • we recommend purchasing your fuel from “name brand” gas stations. We have seen problems with cheaper gas from some discount type outlets. • we recommend filtering your fuel between your fuel container and your plan...

  • Page 7: Starting

    Kcs 62cc manual 6 starting 1. Always wear a heavy leather glove when starting the motor. 2. Check that prop bolts are tight and spinner is secure. 3. Make sure the starting area is free of dirt, sand, gravel, or other loose debris 4. Turn on the radio system and check the throttle operation and posi...

  • Page 8: Trouble Shooting

    Kcs 62cc manual 7 needle adjustments (cont'd) • adjust the low end needle until you achieve a smooth idle and a reliable transition to high throttle. Generally if the motor “stutters” or “coughs” in the mid range or when the throttle is advanced, the low end needle is too rich and possibly even the ...

  • Page 9: Maintenance

    Kcs 62cc manual 8 • engine starts backwards: 2 stroke reed valve engines can generally run in either direction. Make sure the prop is flipped forcefully through the compression stroke. Without enough force, the prop may "bounce" off compression and run backwards. If any problem persists, please cont...