Keba KeContact P30 x series Configuration Manual - Introduction

P30 x-series

Introduction

Configuration manual V4.00

5

© KEBA

1

Introduction

Information

This document refers to the following software version:

  From software version 1.5 and higher

Before configuring, check if the charging station is a P30 x-series with the

specified or a later version of the software.

The device variant can be determined by the product name on the name-

plate. The software version can be read out via the web interface. For more

information, see the operating instructions.

1.1

Purpose of the document

This document describes the configuration of the P30 x-series charging sta-

tion.

Information

This document is an extension to the supplied manuals of the P30 x-series

charging station. You must comply with all instructions and safety notes in

these manuals!

1.2

Requirements

This document contains information for persons with the following require-

ments:

Target group

Required knowledge and abilities

End customer

Knowledge of:

●

the mode of operation of the charging station,

●

the displays and operating elements of the charging station.

Start-up technician

Electrician with suitable basic technical basic education

Knowledge of:

●

current valid safety information,

●

the mode of operation of the charging station,

●

the displays and operating elements of the charging station,

●

basics of network technology,

●

the troubleshooting,

●

the setting options on the charging station.