Let’s get started..
1 2 3 4 what’s inside smart vent herringbone faceplate 4x aa batteries 2 mounting screws quick look 4 x aa batteries screws to secure factory reset button led status indicator 1 2 3 4 1.
Plug your smart bridge into your home router, launch the keen home app and follow the the on-screen instructions. Pull the green arrow tab to activate your smart vent. Its led will double blink green to indicate it is ready to pair with your bridge. If the tab was pulled early and the led is no long...
If required, use the included two screws to install and secure your smart vent. The screws won't be needed in floor installation and may not be necessary in wall installation, depending on the home. Remove the existing floor, wall, or ceiling vent register where you want to install your smart vent. ...
Orange means heating blue means cooling purple means fan mode or smart vent activity double blinking red means there is an obstruction. Reset your smart vent by ejecting and reinserting the batteries double blinking green means your smart vent is attempting to pair with your hub triple blinking gree...
