1. DL manuals
  2. KEENCUT
  3. Cutter
  4. Javelin
  5. Instructions

KEENCUT Javelin Instructions

Summary of Javelin

  • Page 1

    Cutter bars instructions thankyou for choosing the keencut javelin, practik or max. Every effort has been made to bring you a superbly built product with the promise of many years of good service. Keencut – the world’s finest cutting machines keencut limited, tyson courtyard, weldon south industrial...

  • Page 2: Setting Up

    1 setting up 1 fitting the wall brackets space the brackets so that the javelin, practik or max is evenly supported and does not sag, ensure they are securely fixed to the wall. Inserting and setting the blade the blade is inserted from the back of the blade holder, push it fully forward and tighten...

  • Page 3

    2 using the javelin/practik/max . . . 2 . . . For cutting pvc foamboard and heavyweight materials. Position the material under the javelin, practik or max and align the sight edge with your cutting marks. The javelin, practik or max will cut within 0.5 to 1mm [0.02” to 0.04”] of the sight edge, this...

  • Page 4: Maintenance

    3 maintenance 3 cleaning and lubrication it is good practice to keep a dust sheet over the javelin, practik or max if it is not to be used for extended periods. In any event regularly clean it with a dry cloth, to remove any stubborn stains use a cloth dampened with a little water/detergent. Should ...