Keiser REAR WHEEL DRIVE BIKE Assembly
REAR WHEEL DRIVE BIKE ASSEMBLY
INTRODUCTION
KEISER CORPORATION has always taken pride in designing and engineering the
highest quality equipment on the market. This means that you will receive years of low
maintenance and minimal repairs from every one of our bikes. Only the highest quality
products have the KEISER name on them.
This manual was written with the customer in mind. It will assist you in the assembly of
the KEISER Rear Wheel Drive Bike. Since we always find ways to improve our
products, parts and machine designs are subject to change without notice. If you have any
questions, please call our service department at (800) 888-7009.
WORD DEFINITIONS
SAFETY CAUTIONS and WARNINGS:
We've put a number of safety cautions in this book. We use the word Caution! to tell you
about things that could cause bodily injury to persons on or around the equipment if you
were to ignore the following instructions, and the word Warning! to ensure the proper
installation of components and that the instructions are followed for the safety of the
users and for maximum machine life or the warranty is void.
HINTS:
We use the word Note! in this book to tell you about things that we recommend you
doing or things to be aware of before performing the instructions. These notes were
placed in the manual to aid you during a certain procedure.
Caution
The unit should only be operated with the chain cover guard fitted
correctly, as supplied. Children in the area and users are vulnerable to
injuries to fingers if the unit is used without the chain cover guard.
Warning!
Failure to follow the assembly or operation instructions as provided by this
manual or any other instructions pertaining to the assembly and/or
operation of KEISER equipment will result in voiding the warranty and
could lead to serious injury.