Keison AT-320 IAX2 User Manual

Summary of AT-320 IAX2

  • Page 1

    At-320 iax2 phone user manual (v1.43) at-320 iax2 phone user manual 1. At-320 ip phone appearance introduction .............................. 3 1.1 function keys of at-320 ip phone introduction (normal state):......................... 4 2. Features ......................................................

  • Page 2

    At-323 iax2 phone user manual (v1.43) 2 7. Faq .................................................................................................................. 40 q1 for two ports of the at-320/at-323, what is the function for the other port? .. 40 q2 why i can’t see the complete setting page when...

  • Page 3

    At-323 iax2 phone user manual (v1.43) 3 1. At-320 ip phone appearance introduction ● at-320 ip phone front illustration (refer to fig 1.1): fig 1.1 at-320 ip phone illustration keison products www.Keison.Co.Uk sales@keison.Co.Uk tel: +44 (0)1245 600560

  • Page 4

    At-323 iax2 phone user manual (v1.43) 4 1.1 function keys of at-320 ip phone introduction (normal state): keys function locip with handset hung, press this key to get local ip address of the phone number with handset hung, press this key to get phone number serip with handset hung, press this key to...

  • Page 5

    At-323 iax2 phone user manual (v1.43) 5 2. Features 2.1 hardware ● main chip—pa1688 50mhz ● data memory—16mb sdram ● program memory—8 mb flash memory ● ethernet jack—1/2 10/100m jacks ● ac/dc adapter—output 12v dc, 450ma 2.2 software ● dhcp support for lan or cable modem ● pppoe support for adsl or ...

  • Page 6

    At-323 iax2 phone user manual (v1.43) 6 ● telnet internet's remote login protocol ● ftp file transfer protocol ● http hyper text transfer protocol 2.4 operating requirements ● operation temperature: 0 to 40° c (32° to 104° f) ● storage temperature: -30° to 65° c (-22° to 149° f) ● humidity: 10 to 90...

  • Page 7

    At-323 iax2 phone user manual (v1.43) 7 3. Configuration four different ways can be used to configure at-320 ip phone: phone keypad, web browser, telnet commands and palmtool configuration tool on computer. 3.1 phone keypad setup 3.1.1 function keys introduction: when using keypad and lcd to configu...

  • Page 8

    At-323 iax2 phone user manual (v1.43) 8 ● save the settings when all parameters have modified, press “exit” key to return to the main menu, and press “vol+” or “vol-” to page the menu up or page the menu down; when “save settings” submenu item is selected, press “ok/speaker” key to confirm,at-320 ip...

  • Page 9

    At-323 iax2 phone user manual (v1.43) 9 ¾ menu structure: keison products www.Keison.Co.Uk sales@keison.Co.Uk tel: +44 (0)1245 600560

  • Page 10

    At-323 iax2 phone user manual (v1.43) 10 keison products www.Keison.Co.Uk sales@keison.Co.Uk tel: +44 (0)1245 600560

  • Page 11

    At-323 iax2 phone user manual (v1.43) 11 3.1.2 keypad setup step by step: for example, you want to setup jack’s number 56712389 as speed dial number, you can: step 1. Enter setup mode: press “speaker” key Æenter “1234#”Æyou can see lcd display “password” Æenter “1234”Æpress “speaker” key to confirm....

  • Page 12

    At-323 iax2 phone user manual (v1.43) 12 3.2 configured by web double click icon to open the ie browser. Input the ip address of the phone into address bar ( ), and then input password of the phone into the following page. Default password 1234 is ordinary password and super password is 12345678. Wi...

  • Page 13

    At-323 iax2 phone user manual (v1.43) 13 3.2.1 network setting fig 3.2 network setting ● iptype: set how ip phone gets relevant network parameters by selecting corresponding item from drop down list. Static ip: select this item to authorize users set ip address, subnet mask and router ip address of ...

  • Page 14

    At-323 iax2 phone user manual (v1.43) 14 ● dns: with static ip selected in iptype drop down list, please enter ip address of dns server here. ● dns 2: with static ip selected in iptype drop down list, please enter ip address of backup dns server here. ● mac: mac address is the physical address suppl...

  • Page 15

    At-323 iax2 phone user manual (v1.43) 15 ● vad: enable/disable vad (voice activity detection). ● agc: enable/disable agc. ● aec: enable/disable aec. ● g.723.1 high rate: enable/disable g.723.1 high rate. G.723.1 high rate is 6.3kbps, low rate is 5.3kbps. ● audio frame: set audio frames in rtp packag...

  • Page 16

    At-323 iax2 phone user manual (v1.43) 16 3.2.3 dial plan setting fig 3.4 dial plan setting ● use dialplan: set whether use dial plan or use dial number by selecting the corresponding item in drop down list. Disable: do not use dial plan or dial number by selecting this item. Enable: use dial plan by...

  • Page 17

    At-323 iax2 phone user manual (v1.43) 17 will call out using current setting. Enable: use designated system to place calls by selecting this item. Innerlineprefix: with enable selected in innerline dropdown list, please fill the prefix number pick up to inner line, such as 0. ● use digitmap: enable/...

  • Page 18

    At-323 iax2 phone user manual (v1.43) 18 3.2.4 iax2 protocol settings fig 3.5 iax2 protocol settings ● service addr: please set the uri (domain name/ip address : service port) of the asterisk server into “service addr”. When the default service port 4569 is used, “: service port” can be omitted. ● r...

  • Page 19

    At-323 iax2 phone user manual (v1.43) 19 selecting this item. No check: disable checking firmware tags when upgrading. This is not suggested, because it will increase the risk of upgrading the wrong firmware into the phone. 3.2.5 other settings: fig 3.6 other setting page ● password: set the passwor...

  • Page 20

    At-323 iax2 phone user manual (v1.43) 20 parameters can be modified. Fig 3.7 setting page using ordinary pin with debug set as 0 [disable] ● save settings : click this button to save the configuration and the phone will reboot. Once the phone reboots successfully, the new configuration is effective....

  • Page 21

    At-323 iax2 phone user manual (v1.43) 21 fig 3.8 phone book illustration ● upgrade firmware: click this button to update the program, the ring and the digit map of ip phone. Fig 3.9 upgrade firmware illustration keison products www.Keison.Co.Uk sales@keison.Co.Uk tel: +44 (0)1245 600560

  • Page 22

    At-323 iax2 phone user manual (v1.43) 22 3.3 configured by palmtool palmtool is a tool designed especially to configure and upgrade the at-320 ip phone. On a pc double click icon to open the palmtool. The index page of palmtool will popup. Input the ip address of the phone into local ip field (such ...

  • Page 23

    At-323 iax2 phone user manual (v1.43) 23 3.4 telnet configuration ● on the pc choose start>run, and then type telnet 192.168.1.100 into run field in popuping run dialog. Or input telnet 192.168.1.100 in the dos window. Then the following information will be displayed. Pa168x v1.43 settings password ...

  • Page 24

    At-323 iax2 phone user manual (v1.43) 24 relevant usage: none detailed description: list help of all commands for example: p:\>? Set get list settings store x store current to xth settings load x load xth settings to current exit write save settings ¾ command get syntax description: no optional para...

  • Page 25

    At-323 iax2 phone user manual (v1.43) 25 fwdnumber 82378009 fwdpoweroff 1[enable] fwdalways 1[enable] fwdbusy 1[enable] fwdnoanswer 1[enable] answer 30 digitmap 1[enable] ***************protocol settings*************** serviceaddr 203.93.9.57 registerttl 60 phonenumber 82378808 account [empty] pin [...

  • Page 26

    At-323 iax2 phone user manual (v1.43) 26 ¾ command set syntax description: set keywords value usage: used to configure password and other running parameters of at-320 ip phone. Detailed description: set iptype x set how ip phone gets relevant network parameters. X ranged from 0 through 3: 0: authori...

  • Page 27

    At-323 iax2 phone user manual (v1.43) 27 set codec1 x set the priority 1of the audio compression algorithm. X is range from 0 through 4: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm. Set codec2 x set the priority 2 of the audio compression algorithm. X is range from 0 through 4: 0: g729; 1:g7231; 2:...

  • Page 28

    At-323 iax2 phone user manual (v1.43) 28 rings in different frequency; 1: do not ring; 2: ring as music saved by user; 3: set ring used the individualized tone provided by system (need system support). Set speakerin x set initial volume of microphone of the base. X is ranged from 0 through 15. Set s...

  • Page 29

    At-323 iax2 phone user manual (v1.43) 29 set callwait x set whether to use call wait. X ranged from 0 to 1: 0: do not use call wait; 1: use call wait. Set fwdnumber xxxxxxx set receiving forwarded calls phone number. Xxxx must be an arabic numeral and no longer than 16 characters set fwdalways x ena...

  • Page 30

    At-323 iax2 phone user manual (v1.43) 30 from 0 through 224. Set superpassword xxxx set super password of the at320 ip phone. Xxx must be ascii characters. Set debug x set open debugging message output grade for special tool. X is ranged from 0 through 5: 0: close debugging output; 1: output the ope...

  • Page 31

    At-323 iax2 phone user manual (v1.43) 31 relevant usage: none ¾ command write syntax description: no keyword and parameter usage: save the configuration and restart the at-320 ip phone. ¾ command ping syntax description: ping ip address usage: ping ip address of other nat device relevant usage: in t...

  • Page 32

    At-323 iax2 phone user manual (v1.43) 32 please be patient. Using ftp command in telnet to get file spends almost same minutes as getting file using phone. So if nothing is displayed after too long time, it means that ftp is fail. Note all the telnet commands of at-320 ip phone should be written in ...

  • Page 33

    At-323 iax2 phone user manual (v1.43) 33 4. Upgrade at-320 ip phone 4.1 use ie browse to upgrade the ip phone step 1: fill the at320’s ip in the ie browse (you can obtain at320 ip through the “local ip” button of keypad) step 2:use super password to access the at320 setting page and choose the debug...

  • Page 34

    At-323 iax2 phone user manual (v1.43) 34 note please do not change the name of the upgraded program, or the operation will be fail. Keison products www.Keison.Co.Uk sales@keison.Co.Uk tel: +44 (0)1245 600560

  • Page 35

    At-323 iax2 phone user manual (v1.43) 35 5. Usage of the phone 5.1 receiving calls at-320 ip phone can receive incoming calls from other at-320 ip phone and devices that support the iax2 protocol. It works just like an ordinary phone for incoming calls. When it rings, you can receive the call by fol...

  • Page 36

    At-323 iax2 phone user manual (v1.43) 36 5.2 place a call ● call another ip phone under the same gatekeeper: 1. Handset: pick up the handset and listen for the internet dial tone. Then dial the phone number you wish to call and press or to end the dialing. Once the call connection has been establish...

  • Page 37

    At-323 iax2 phone user manual (v1.43) 37 if at-320 ip phone does not login the gatekeeper, you can place a call by lifting the handset or pressing and then inputting the ip address of the other party, and then pressing or note when using direct ip call please use “*” replace the “.” in the ip addres...

  • Page 38

    At-323 iax2 phone user manual (v1.43) 38 5.3 view records ● view missed calls click then you will hear the record of missed call. Click to turn the numbers orderly; click to turn the numbers reservedly. If there is no record, you will hear nothing. ● view received call click then you will hear the r...

  • Page 39

    At-323 iax2 phone user manual (v1.43) 39 appendix table at-320 ip phone digital-character key map: keys press once press twice press thrice press quartic press quintic 1 1 . , ?/_ !// 2 2 a/a b/b c/c [ 3 3 d/d e/e f/f ] 4 4 g/g h/h i/i * 5 5 j/j k/k l/l 6 6 m/m n/n o/o # 7 7 p/p q/q r/r s/s 8 8 t/t ...

  • Page 40

    At-323 iax2 phone user manual (v1.43) 40 7. Faq q1 for two ports of the at-320/at-323, what is the function for the other port? A: the other port can be connected with other network equipments,such as hub, switch, pc, ip phone. Q2 why i can’t see the complete setting page when access the at-320 by i...

  • Page 41

    At-323 iax2 phone user manual (v1.43) 41 q5 how to update the protocol for the at-320/at-323? A: please refer to chapter 4 q6 after updating at-320/at-323 ,the lcd shows " ■ ■ " and stops ,how to deal with it? A: (1) reset to the factory default; if it still can’t solve the problem ,pls. Refer to (2...

  • Page 42

    At-323 iax2 phone user manual (v1.43) 42 q11 why is there no sound after pressing the speaker button while using mgcp protocol? A: the speaker button will have the sound only after registering successfully with the mgcp protocol. Q12 why does the other side feel my voice is very weak? A: pls. Adjust...

  • Page 43

    At-323 iax2 phone user manual (v1.43) 43 sent. 4."prefix" effective only when "dial number"is not empty. This serves for those calling cards. The number sent is just "dial number". During the call connection, program will automatically send out a number made up with ["account"+ "pin"+ number convert...

  • Page 44

    At-323 iax2 phone user manual (v1.43) 44 2.Set "sntp ip"to "255.255.255.255" then phone will not visit timer server to get date and time. If one must know the current date and time, please set "sntp ip" to the ip address of a local time server which has fast access. Q17 how to set tos field? A:the 8...

  • Page 45

    At-323 iax2 phone user manual (v1.43) 45 without prior notice. At-320 iax2 phone user manual (v1.43) all rights reserved keison products www.Keison.Co.Uk sales@keison.Co.Uk tel: +44 (0)1245 600560