Kelon ND10-45 User Instruction - page 8
13
6
7
11
7
3.12 LOCKING THE CONTROL PANEL FUNCTION
-Press the program selector button"5" to make the program
type flash
-Press the programming button "8" and the setting of time
button"11" at the same time until lock symbol (a padlock)
is displayed.All the control functions are now locked,and the
buttons will no longer operate.Do the same to cancel locking
until the lock symbol disappears.
3.13
TEMPERATURE SWITCH
Press the button"13" for a little long time,the temperature can
be switched between Fahrenheit (F) and Celsius temperature (
C).
The default seeting is
temperature.
Celsius
3.14 Timer
3.14.1 When the machine is on,press the timer button "14" for
timing shutdown,then press the up button"6"or down button"7"
to set timing.When it's setting timing, the machine is off.
3.14.2 When the machines is off,press the timer button"14" for
timing working,then press the up button"6"or down button"7" to
set timing.When it's setting timing,the machine will be start to work.
3.14.3 The timing setting is one hour unit within 24 hours.
are saved for ever, after sudden
power off the heater will be restarted automatism.
When quantity electricity of
will flash symbol of low
3.15 Low battery indicator
timer battery ,the LCD screen
quantity electricity to remind
user to replace new battery.
Replace battery
+
CR 2025
3V
Battery