Summary of Duo
Page 1
Wireless wine thermometer model: duo.
Page 2
2.
Page 3: Contents
Contents introduction................................................................................. Quick start guide......................................................................... Components supplied................................................................. Best practice...........
Page 4: Storage
1 thank you for purchasing the kelvin duo wine thermometer. When developing this product our goal was to provide a meaningful and easy way to understand different wine serving temperatures. It’s a common generalization that red wine should be served at room temperature and white wine should be serve...
Page 5: Quick Start Guide
2 quick start guide for those who use the product first then decide to read the manual later, please find the following quick start steps which may help you: charge the battery in the bottle clip. (see page 9). Place batteries in the receiver base (see page 4) . Turn on transmitter clip (see page 6)...
Page 6: Best Practice
3 best practice ensure the clip is always firmly registered against the exterior of the glass bottle, do not place the clip against a label. Ensure the clip is always below the level of the wine inside the bottle. When placing or removing the bottle from the refrigerator there maybe a sudden differe...
Page 7: Battery Installation
4 battery installation it is necessary to fit 3x aaa batteries (not supplied) into the receiver base. Turn the receiver base over to reveal the base plate of the product. Using a suitable screwdriver carefully remove the 4 securing screws from the base plate putting them to one side. Take care not t...
Page 8: Using The Product
5 using the product turning the power on it is necessary for both the clip and the receiver base to be turned on. Turn on the receiver base: turn the receiver base over. Use the slide switch to turn on the power either push the switch to the left for fahrenheit operation, or to the right for celsius...
Page 9: Selecting Your Wine
6 colour sticker identification the product is supplied with a sheet of 24 coloured stickers (2 x 12 different colours). The purpose of these is to provide two corresponding coloured stickers which can be placed on both the transmitter clip and receiver base to allow quick identification when using ...
Page 10
7 we have also provided a colour reference chart which will give you an indication as to the type of wine based on its colour. If you are still unsure as to the type of wine you are drinking please refer to the wine producer who will be able to clarify this for you. Use the wine button to select the...
Page 11: Storing Your Preferences
8 storing your preferences the kelvin duo has the ability to store the settings for 3 of your favourite wine types, saving you time if you drink a particular wine type frequently. It will also allow you to store any manual adjustments made to temperature for quick recall. Once you have selected the ...
Page 12: Clip Charging Process
9 clip charging process the thermometer transmitter clip has been fitted with a rechargeable battery to avoid having to repeatedly open the sealed back plate; it also reduces the overall running cost of the unit by not having to replace batteries periodically. Use the usb charging lead supplied and ...
Page 13
10 receiving information on the receiver base the clip will start to transmit data immediately after power up, ensure the receiver base is also switched on as detailed on page 5 to receive temperature data. Based on your previous wine selection the target temperature will be shown at the top of the ...
Page 14: Contact Details
11 contact details for more information about the kelvin range please visit our web site: www.Mykelvin.Co.Uk kelvin duo is a product manufactured by: target holdings (uk) limited unit 11 high march, daventry, northamptonshire, nn11 4hb, united kingdom www.Targetholdings.Co.Uk patent pending kelvin i...
Page 15
12.
Page 16
Www.Mykelvin.Co.Uk art ref: 72002-7001-10