1. DL manuals
  2. Kelvinator
  3. Hob
  4. KHG640SS2
  5. User And Installation Instructions Manual

Kelvinator KHG640SS2 User And Installation Instructions Manual

Summary of KHG640SS2

  • Page 1

    Built in gas hob khg950ss2/khg640ss2 user and installation instruction.

  • Page 2

    Contents for your safety ……………………………………………………………… … 1 description of the hob ………………………………………………………… 5 instructions for use ………………………………………………………… … 6 cleaning and maintenance ……………………………………………………… 8 for the installation technician technical data ………………………………………………………………… 10 instructions for the inst...

  • Page 3

    Guide to reading the instructions the following symbols will help you when reading the instructions: safety information “step by step” instructions suggestions and advice information concerning environmental protection this appliance complies with the following eec directives: - 73/23 and 90/683 (re...

  • Page 4: For Your Safety

    For your safety this appliance is adjusted to operate on lpg only. If you smell gas: turn off gas supply at bottle extinguish all naked flames; do not operate any electrical appliances ventilate the area check for leaks as detailed in this manual if odour persists, contact your dealer or gas supplie...

  • Page 5

    Note that your invoice is required in the event that you wish make a guarantee claim. Important information for the installer. This appliance may only be installed by a lp gas installer registered with the liquefied petroleum gas association of southern africa. The appliance must be installed in acc...

  • Page 6: Installation

    These instructions have been drawn up for your safety and that of others. You are therefore requested to read them carefully before installing and using the appliance. Keep this instruction manual for future reference as necessary. If the appliance is sold of moved, make sure that the manual is hand...

  • Page 7: During Use

    During use · this product is designed to cook foods inside ordinary homes and for non-professional purposes. It should not be used for any other purpose. · after using the appliance, make sure that all controls are in “closed” or “off” position. · if you use an electrical socket close to this applia...

  • Page 8: Decommissioned Appliances

    Environmental protection advice · all the materials used are environmentally compatible and recyclable. Please make your contribution to conserving the environment by using the separate waste collection channels available. Decommissioned appliances · appliances which are no longer used or usable are...

  • Page 9

    Instructions for use the hob control knobs the symbols on the control knobs mean the following: ● no gas flow maximum gas flow minimum gas flow all operating positions must be set between the maximum and minimum flow settings, and never between the maximum setting and the closed position. (symbol pr...

  • Page 10

    Lighting the burners to obtain a flame more easily, light the burner before placing a cooking utensil on the pan stand to light a burner, proceed as follow: for version with lighting integrated in the control knob push the knob of the burner fully down and turn it anticlockwise to the “maximum flow”...

  • Page 11

    Cleaning and maintenance before each operation, disconnect the appliance from the electrical mains and allow it to cool down. General cleaning wash enameled parts with lukewarm water and detergent: do not use abrasive products which might damage them. Wash the flame caps and burner caps often with b...

  • Page 12

    Routine maintenance have the condition and efficiency of the gas pipe and the pressure regulator(if installed) checked periodically. If anomalies are found, do not repairs but have the faulty part replaced. To ensure good performance and safety, the gas regulator taps must be greased periodically. P...

  • Page 13

    Technical data burner type max output min output g20 20mbar g30/31 20-30/37mbar g30 50mbar kw kw nozzle making mm cons m 3 /h nozzle making mm cons g/h nozzle making mm cons m 3 /h small auxiliary burner 1.00 0.30 0.70 0.095 0.50 73 0.43 73 medium semi-rapid burner 1.75 0.65 0.97 0.157 0.65 120 0.58...

  • Page 14

    Installation premises for proper operation of a gas appliance, the air necessary for the combustion of the gas must be able to flow into the room naturally. The air must flow into the room directly through openings in the outside walls. These openings must have an unobstructed cross-section must be ...

  • Page 15

    Connection to the gas supply the gas connection must be made in accordance with the local standards. When installing fit a safety tap at the end of the pipeline. The appliance leaves the factory tested and set for the type of gas indicated on the plate inside the bottom guard, close to the gas conne...

  • Page 16

    Electrical connection the appliance is profited to operate with a power supply voltage of 230vsingle-phase. The connection must be made in accordance with the regulations and laws in force. Before making the connection, make sure that: 1) the safety circuit-breaker and the electrical system are able...

  • Page 17

    Adapting to the different types of gas changing the nozzles 1) remove the pan standee. 2) remove the burner caps and flame caps from the burners. 3) use a size 7 socket wrench to unscrew and remove the nozzles, replacing them with those corresponding to the type of gas to be used (see the table ). 4...

  • Page 18

    Building into fitted kitchen units these hobs are designed for installation in fitted kitchen units up to 600mm deep with suitable characteristics. Any cabinet side panels taller than the height of the hob itself must be at least 150mm away from the opening into which the hob is inserted. The dimens...

  • Page 19

    Installation options on base cabinet with door when constructing the cabinet, suitable precautions must be take to prevent contact with the casing of the hob, which becomes very hot during operation. The recommended method for overcoming this problem is illustrated in fig.1 the panel underneath the ...

  • Page 20

    Cutting-out size: 17.

  • Page 21: Service And Spares

    Service and spares in the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local kelvinator service centre by telephoning: 010 207 3000 (south african customers) +27-10-207-3000 (international customers) help us to help you please determine your type of...

  • Page 22

    Kelvinator guarantee conditions for domestic use only not for commercial or industrial use any alteration or modification of the equipment voids the guarantee failure to use a certified electrician or kelvinator authorised service agent or genuine parts for installation or service voids the guarante...

  • Page 23

    6. Kelvinator shall not be responsible in terms of this guarantee for the replacement or repair of any part of the equipment which may have been damaged in transit if delivery is undertaken by any party other than kelvinator or an authorised agent. 7. All gas appliances are to be installed by a gas ...