Kelvinator KI 255BF Instruction Manual - page 5
° ² È « × ¢ Ò â Ê Ï î
¹
Ê
Õ
Ï
Å
Ð
¶
¨
7
8
Door Reverse
Reversing the Door
Before you reverse the refrigerator door, you should ensure the refrigerator
Is unplugged and empty and have someone to help you. During the process
Screwdriver and adjustable spanner will be used.
Undo the four retaining screws of
the worktop and remove the worktop
Undo the retaining screws of the
top bracket and remove the top
bracket. Then take away the upper
door and put it in a safe place.
While supporting the lower door,
remove the central bracket by undo
the 2 screws. .
Take away the lower door from the
bottom hinge pin. Tilt the fridge onto
its back and rest it on a firm surface .
Remove the bottom bracket by
unscrewing. Remove and reverse
the adjustable foot from left side to
right side and remove the fixed screw
in the left side.
Remove the lower hinge pin using a
spanner. Turn the hinge bracket over
and replace it in the same slot. Replace
the bottom bracket on the other side and
lift the refrigerator upright.
R ever s e the blank ing plugs . R emove
the door hinge caps on both door s (top
and bottom) and ins er t on the oppos ite
s ide of the door.
U ns cr ew the hinge pin fr om the top
br ack et us ing the s panner. T ur n the
br ack et over and r eplace it in the
s ame s lot.
Check that door s ar e aligned hor iz ontally
and ver tically and that all s eals ar e clos ed
on the cabinet befor e finally tighten the
centr al hinge and the top br ack et. R emove
and r ever s e the plas tic ins er t of the wor k top
befor e r efit the wor k top. R e-adjus t the
levelling feet.
R efit the top br ack et while r efitting
the upper door. Do not fully tighten
s cr ews .
R eplace the centr al br ack et while
r efitting the lower door, T o as s is t with
final adjus tment do not fully tighten
the br ack et s cr ews .