Kelvinator KSE26CRC Installation Manual

Manual is about: Fixed Speed Split Room Air Conditioner

Summary of KSE26CRC

  • Page 1

    Installation manual refrigerant r410a kse26crc, kse26hrc, kse35crc, kse35hrc, kse53hrc, kse62hrc, kse88hrc kse70crc, kse70hrc, kse88crc fixed speed split room air conditioner.

  • Page 2

    2 contents kelvinator air conditioning speed split room air conditioner. We are sure you will find your new air conditioner a pleasure to use. Before you use the air conditioner, we recommend that you read through the entire user manual, which provides the description of the air conditioner and its ...

  • Page 3

    Caution 1 the unit must only be installed by a qualified refrigeration mechanic and electrical work carried out by a qualified electrician according to local or government regulations and in compliance with this manual. 2 before installation, please contact a qualified air conditioner installer. If ...

  • Page 4

    4 notice for installation kelvinator air conditioning safety precautions for electric appliances 1 a dedicated power supply circuit should be used for products not supplied with a service cord and plug in accordance with local electrical safety regulations. 3 the unit must be reliably earthed and co...

  • Page 5

    Kelvinator air conditioning installation drawing 5 installation drawing space to the ceiling space to the wall space to the wall air outlet side space to the floor above above 15cm above 15cm above 300cm cm 15cm above the dimensions of the minimum in between if these dimensions are not adhered to th...

  • Page 6

    2 insert the piping-hole sleeve into the hole to prevent the connection piping and wiring from being damaged when passing through the hole. Ø 55/ indoor outdoor wall pipe seal pad installation of drain hose 1 connect the drain hose to the outlet pipe of the indoor unit. Bind the joint with rubber be...

  • Page 7

    Kelvinator air conditioning installation instructions 7 installation of indoor and outdoor electric wires 1 open the front panel. 2 remove the wiring cover connect and fix power 3 make the power connection cord pass through the hole at the back of indoor unit. 4 reinstall the cord anchorage and wiri...

  • Page 8

    8 installation instructions kelvinator air conditioning outer diam. (mm) a(mm) max. Min. φ6.35 1.3 0.7 φ9.53 1.6 1.0 φ12.7 1.8 1.0 φ16.0 2.4 2.2 bar copper pipe clamp handle red arrow mark cone yoke handle bar "a " tightening connection • align the center of the pipes. • sufficiently tighten the fla...

  • Page 9

    Kelvinator air conditioning installation instructions 9 spanner torque wrench piping taper nut indoor unit piping model suction (mm) discharge (mm) maximum maximum 6.4 (1/4") 15 10 6.4 (1/4") 15 10 6.4 (1/4") 20 10 6.4 (1/4") 20 10 6.4 (1/4") 16.0 (5/8") 25 10 6.4 (1/4") 16.0 (5/8") 10 6.4 (1/4") 16...

  • Page 10

    10 kelvinator air conditioning installation instructions installation and maintenance of hepa filter check after installation and operation test check after installation items to be checked possible malfunction has the unit been fixed firmly? The unit may drop, shake or emit noise. Have you done the...

  • Page 11

    This document sets out the terms and conditions of the product warranties for electrolux appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your appliance. 1. Inthiswarranty (a) ‘acceptable...

  • Page 12

    Print code: airwave_im_jul11 if you’d like further information about kelvinator appliances, please visit your retailer, phone or email our customer care team or visit our website. Telephone: 1300 363 640 fax: 1800 350 067 email: customercare@electrolux.Com.Au web: www.Kelvinator.Com.Au kelvinator. W...