Test fastcool 10 operating manual brugsanvisning gebrauchsanweisung manual de instrucciones käyttöohje manuel d’utilisation manuale d’uso gebruiksaanwijzing bruksanvisning instrukcja obsługi manual de utilização Инструкции по эксплуатации bruksanvisning 操作手册 en da de es fi fr it nl no pl pt ru sv zh.
En operating manual english.
En contents 1. Preface ........................................................................................... 3 1.1 general ....................................................................................................................................... 3 1.2 product introduction ...........
En 1. Preface 1.1 general congratulations on choosing the fastcool 10 cooling unit. Used correctly, kemppi products can significantly increase the productivity of your welding, and provide years of economical service. This operating manual contains important information on the use, maintenance and s...
En 2. Installation 2.1 removal from packaging the equipment is packed in durable packages specially designed for them. Check the equipment before taking it into use, to make sure that the equipment or a part of it have not got damaged during the transportation. Also check that the delivery correspon...
En 2.5 preparing for operation note! Cooling liquid is injurious! Avoid also contact with skin or eyes. In case of injury, seek for medical advice. See also 2.4.2. Main parts of cooling unit. 1. Connect the mains voltage and control connectors of the cooler unit to the corresponding connectors on th...
En fastmig km when leaving the factory, cooling unit status is set 'on'. If no cooling unit is connected, set the cooling unit status to 'off'. Follow the instructions described in the graphic below for sf 51/sf 54 panels. Having selected the cooling state required, reset the power source by switchi...
En fastmig pulse and fastmig x the factory default setting for fastmig pulse is auto. If a cooling unit is not connected and the operator tries to establish gas-cooled operation together with a gas-cooled gun, err 27 is displayed. To establish gas-cooled operation, select cooler ‘off’. This is done ...
En 4. Maintenance note! Watch out for mains voltage when handling electric cables! In planning product maintenance machine utilization degree and circumstances should be considered. Careful use and preventive maintenance help to avoid unnecessary production disturbances and breaks. 4.1 daily mainten...
En 5. Ordering codes cooling unit fastcool 10 6068100 welding cooling liquid in 10 litre cans sp9810765 6. Technical data fastcool 10 operating voltage 400v -15%. …+20% connection capacity 100 % ed 250 w cooling power 1 kw start pressure, max. 0.4 mpa cooling liquid kemppi brand cooling liquid tank ...
Www.Kemppi.Com 1906810 1515 kemppi oy kempinkatu 1 pl 13 fin-15801 lahti finland tel +358 3 899 11 telefax +358 3 899 428 export@kemppi.Com www.Kemppi.Com kotimaan myynti: tel +358 3 899 11 telefax +358 3 734 8398 myynti.Fi@kemppi.Com kemppi sverige ab box 717 s-194 27 upplands vÄsby sverige tel +46...
