Summary of FE20
Page 1
Operating manual käyttöohje bruksanvisning bruksanvisning brugsanvisning gebrauchsanweisung gebruiksaanwijzing manuel d’utilisation manual de instrucciones instrukcja obsługi Инструкции по эксплуатации 操作手册 manual de utilização manuale d’uso en fi sv no da de nl fr es pl ru zh pt it fe 20 , 25, 27, ...
Page 3: Operating Manual
Operating manual english.
Page 4
En contents 1. Introduction ......................................................................................................................... 3 1.1 general ....................................................................................................................................... ...
Page 5
En 1. Introduction 1.1 general congratulations on choosing the kemppi equipment. Used correctly, kemppi products can significantly increase the productivity of your welding, and provide years of economical service. This operating manual contains important information on the use, maintenance and safe...
Page 6
En 1.3 operation safety please read and follow these operational safety instructions when installing, operating and servicing the welding gun. Welding arc and welding spatter welding arc can harm unprotected eyes. Also be aware of the risks to other people in and around the working area, as reflecte...
Page 7
En 2. Connecting the gun check wire liner and contact tip suit the wire type and size used. For further information, please refer to section 5. Ordering numbers in this manual. Dress the sharp filler wire. Improves wire loading and consumables life. Connect the welding gun and hand tighten the colla...
Page 8
En fe32 wire inch gas test set on ch panel save set ch clear ch remote memory select quick setup weld data arc force dynamics 4t 2t setup mma pen mma wise 1-mig mig power u synergic program a v m/min mm sf 53w w004270 / minilog load filler wire using the wire inch button, or use the gun trigger. Fe ...
Page 9
En fe 32 enjoy using fe welding gun! 3. Use and maintenance the amount of use and working environment should be taken into consideration when planning the maintenance of mig guns. Correct use and preventive maintenance will help ensure trouble-free operation and excellent gun life. Due to high tempe...
Page 10
En components can become lose during welding heat cycles. Check regularly. Gun cable clear dust from the liner every day during heavy use. • clean wire liner when replacing wire reel, or more often. • check daily that insulations of handle and gun cable are undamaged. • check that there are no sharp...
Page 11
En 4. Operation disturbances welding performance can be effected by a number of issues, including the welding gun and/ or other parts of the welding system. The following information will help you to check, identify and rectify possible causes of welding malfunction. Note! The problems listed and th...
Page 12
En 5. Ordering numbers note! Orange part code colour denotes standard delivery specification. Fe 20: 6602003 (3.5 m), 6602004 (5.0 m) gas nozzle (a x b x c) 9580101 60.5 x 18 x 14 mm, standard 958010101 60.5 x 18 x 14 mm, with insulating bush (= 95801010 + 9591079) 4113470 60.5 x 18 x 14 mm, for spo...
Page 13
En fe 25: 6602503 (3.5 m), 6602504 (5.0 m) gas nozzle (a x b x c) 9580101 60.5 x 18 x 14 mm, standard 958010101 60.5 x 18 x 14 mm, with insulating bush (= 95801010+ 9591079) 4113470 60.5 x 18 x 14 mm, for spot welding 9580101e 60.5 x 20 x 14 mm, thick wall insulating bush 9591010 contact tip (m6) 98...
Page 14
En fe 27: 6602703 (3.5 m), 6602704 (5.0 m) fe 32: 6603203 (3.5 m), 6603204 (5.0 m) gas nozzle (a x b x c) 4295760 76 x 20 x 14 mm, standard / m8 4295760l 79 x 20 x 14 mm, long / m8 4295760c 76 x 20 x 12 mm, conical / m8 4294970 70 x 20 x 14 mm, standard / m6 contact tip (m6) 9876634 ø 0.6 mm 9876635...
Page 15
En fe 35: 6603503 (3.5 m), 6603504 (5.0 m) gas nozzle (a x b x c) 4300260 77 x 22 x 16 mm, standard 4300260l 80 x 22 x 16 mm, long 4300260c 77 x 22 x 13 mm, conical 4307050 77 x 22 x 16 mm, standard, spatter protection bush insulating bush 4307020 contact tip (m8) 9580122 ø 0.8 mm 9580122a ø 0.8 mm ...
Page 16
En fe 42: 6604203 (3.5 m), 6604204 (5.0 m) gas nozzle (a x b x c) 4300380 80 x 25 x 18 mm, standard 4300380l 83 x 25 x 18 mm, long 4300380c 80 x 25 x 14 mm, conical 4307070 80 x 25 x 18 mm, standard, spatter protection bush 4308190 89.5 x 25 x 18 mm, special long insulating bush 4307030 contact tip ...
Page 17
En 6. Technical data gun loading capacity ar + co₂ (a) duty cycle (%) wire diameters (mm) type of cooling fe 20 200 35 0.6–1.0 air fe 25 250 35 0.6–1.2 air fe 27 270 35 0.6–1.2 air fe 32 320 35 0.8–1.6 air fe 35 350 35 0.8–1.6 air fe 42 420 35 0.8–1.6 air connection to mig unit: euro adapter note! M...
Page 18
1925080 1135 kemppi oy kempinkatu 1 pl 13 fin-15801 lahti finland tel +358 3 899 11 telefax +358 3 899 428 export@kemppi.Com www.Kemppi.Com kotimaan myynti: tel +358 3 899 11 telefax +358 3 734 8398 myynti.Fi@kemppi.Com kemppi sverige ab box 717 s-194 27 upplands vÄsby sverige tel +46 8 590 783 00 t...