1. DL manuals
  2. Kemppi
  3. Welding System
  4. FU 11
  5. Operation Instructions Manual

Kemppi FU 11 Operation Instructions Manual - Commandes Et Connecteurs

Summary of FU 11

  • Page 1

    Fu 11 kÄyttÖohje bruksanvisning operation instructions gebrauchsanweisung gebruiksaanwijzing manuel d'utilisation 1923590 9907 lue ja perehdy tähän ohjeeseen ennen hitsauskoneen käyttöönottoa ! Läs noga igenom denna bruksanvisningen före bruket av svetsmaskinen ! Read carefully these instructions be...

  • Page 2: Suomi

    2 / 1923590 / 9907 suomi suomi kÄyttÖsÄÄtimet ja liittimet ........................ 4 langansyÖttÖmekanismin osat lsl – fu 11 ........................................................... 5 kÄyttÖturvallisuus ...................................... 6 takuuehdot.............................................

  • Page 3: Nederlands

    9907 / 1923590 / 3 suomi nederlands bediening en aansluitingen........................ 4 onderdelen im het draadaanvoer- mechnisme lsl – fu 11 ..................................... 5 veilige werking ............................................. 30 garantie voorwaarden ............................. 3...

  • Page 4: Commandes Et Connecteurs

    4 / 1923590 / 9907 suomi jälkivirta-ajan säätö inställning av efterbrinntid burn back time adjustment einstellung für rückbrandzeit instelling voor afbrandvertraging réglage de la durée du retard d´arc langansyötön kokeilu test för trådmatning wire inch testen des drahtvorschubs testen draadanvoer a...

  • Page 5

    9907 / 1923590 / 5 suomi langansyöttömekanismin osat delar i trådmatarmekanismen lsl – fu 11 parts of wire feed mechanism lsl – fu 11 teile im drahtvorschubmechanismus lsl – fu 11 onderdelen im het draadaanvoer-mechnisme lsl – fu 11 pieces du mecanisme de devidage lsl – fu 11 english deut sch frança...

  • Page 6: Operation Safety

    18 / 1923590 / 9907 english operation safety never watch the arc without a face shield designed for arc welding! The arc damages unprotected eyes! The arc burns unprotected skin! Be careful for reflecting radiation of arc! Protect yourself and the surroundings against the arc and hot spray! Remember...

  • Page 7: English

    9907 / 1923590 / 19 english english fu 11 is 4-roll driven light weight wire feeder unit, designed for demanding professional use. The fu 11 is suitable to be used with the multisystem power sources. Technical data * ) concerns electronic components. The product meets conformity requirements for ce ...

  • Page 8

    20 / 1923590 / 9907 english 28 28 for very heavy welding with 1.0-1.2 mm filler wires we recommend you to use the following feed rolls with ball bearing, where there are deviating from other feed rolls two similar grooves: 3138650 red, with plain groove, for 1.0 mm wires 3137390 orange, with plain g...

  • Page 9

    9907 / 1923590 / 21 english ground cable fasten earthing press of ground cable carefully, preferably direct to welding piece. Contact surface of press always should be as large as possible. Clean the fastening surface from paint and rust! Use in your mig equipment 70 mm 2 copper-cables. Thinner cros...

  • Page 10: Operation Control

    22 / 1923590 / 9907 english operation control see operation control and connectors page 4. Local control of wire feed speed stepless control of wire feed speed is 0...18 m/min. The potentiometer is equipped with the memory scale from 1 to 10. Local control for welding voltage stepless control of pow...

  • Page 11

    9907 / 1923590 / 23 english service, operation disturbances the amount of use and the working environment should be taken into consideration when planning the frequency of maintenance of the fu 11. Careful use and preventive maintenance will help to ensure trouble-free operation. The following maint...