Summary of KempGouge ARC 800
Page 1
Operating manual • english käyttöohje • suomi bruksanvisning • svenska bruksanvisning • norsk brugsanvisning • dansk gebrauchsanweisung • deutsch gebruiksaanwijzing • nederlands manuel d’utilisation • français manual de instrucciones • español instrukcja obsługi • polski Инструкции по эксплуатации •...
Page 3: Operating Manual
Operating manual english kempg ouge ar c 800 / © kemppi o y / 1117.
Page 4
En contents 1. Preface ........................................................................................................................................................ 3 1.1 general .................................................................................................................
Page 5
En 1. Preface 1.1 general congratulations on your choice of kempgouge™ arc 800 carbon arc gouging solution. Used correctly, kemppi products can significantly increase the productivity of your welding, and provide years of economical service. This operating manual contains important information on th...
Page 6
En 1.3 introduction kempgouge™ arc 800 is a solution for all arc gouging needs. An 800-a power source with a control panel is included in the package. The gouging carbon and carbon holder must be acquired separately. 1.3.1 power source 6,3 a 6,3 a a4 a2 a5 a6 a7 a8 a9 a1 a3 a10 a10 a11 a9 front view...
Page 7
En 1.3.2 control panel p1 p2 p3 p4 p5 p1 left display (gouging current or name of adjustable parameter) p2 indicator lights for the current area p3 right display (gouging voltage or value of adjustable parameter) p4 setup button p5 control knob (gouging current adjustment, factory reset) 2. Installa...
Page 8
En 2.2 connection to mains the kempgouge™ arc 800 gouging power source is connected to a 400-v three-phase network. The machine is delivered without a connection cable. The cable can be ordered separately in lenght of 5 or 10 metres (see ordering numbers). Before use, check the connection cable and ...
Page 9
En 2.4 gouging and earthing cables 2.4.1 connecting the gouging cable the gouging cable is connected to the power source with a 120 mm 2 dix connector. The cable is connected either to the positive (+) or negative (-) connector of the power source, depending on the metal that is to be worked. The po...
Page 10
En 3.2 how to use the remote control 1. Connect the r10 remote control unit to the service connection a7. Power source detects the new device automatically, and the reference value of the remote control unit appears on the display. 2. Set the desired gouging current with the remote control adjusting...
Page 11
En the adjustment value of the gouging current is shown on the display when you turn the control knob. The adjustment value is shown at the accuracy of 1 a. The indicator light a is shown on the display. The values you use are stored in the control panel memory and will be used when you start the ma...
Page 12
En 4.2 control cable connector fuse the rear wall of the power source contains fuse a9, which protects the control cable connector a7. Using an incorrect fuse may cause damage to the power source. It is important that you always use the right kind of fuse. The type and size of the fuse are indicated...
Page 13
En 5. Service the utilisation level of the power source and its working environment should be taken into consideration in planning the frequency of maintenance of the machine. Appropriate use and preventive maintenance guarantee the trouble-freest use of the equipment. This allows you to avoid inter...
Page 14
En 6. Ordering numbers kempgouge arc 800 (incl. Transport unit) 6284000 connector cable 4 x 16 mm2, 5 m w000869 connector cable 4 x 16 mm2, 10 m w003408 earthing cable 95 mm², 5 m (dix120) 61840951 earthing cable 95 mm², 10 m (dix120) 61840952 earthing cable 120 mm², 5 m 61841201 earthing cable 120 ...
Page 15
En 13 kempg ouge ar c 800 / © kemppi o y / 1117.
Page 16
Www.Kemppi.Com 1928400 1117 kemppi oy hennalankatu 39 pl 13 fin-15801 lahti finland tel +358 3 899 11 telefax +358 3 899 428 export@kemppi.Com www.Kemppi.Com kotimaan myynti: tel +358 3 899 11 telefax +358 3 734 8398 myynti.Fi@kemppi.Com kemppi sverige ab box 717 s-194 27 upplands vÄsby sverige tel ...