Cordless comparison scope instruction manual t-1924c.
2 thank you for purchasing a cordless comparison scope. Packing list dust cover instruction manual power supply / charger warranty card & sheet allen wrench application the ken-a-vision cordless comparison scope is a useful addition to a forensic curriculum, the teaching of embryology, histology, ge...
3 specifications subject to change without notice 1. Seidentopf binocular head 2. Eyepiece tubes 3. Bridge assembly 4. Bridge assembly head socket 5. Fine & coarse focusing 6. Stage 7. Microscope 8. Microsocpe microscope preparation and assembly step 1. Open packing boxes carefully. There will be tw...
4 step 2. At the top of the head socket of each microscope base find three screw holes. There are "saftey screws" in each hole, removable using a small screwdriver. Underneath these "saftey screws" there are set screws. Using the small allen wrench provided, back off the set screws two or three turn...
5 through the condenser for a standard microscope slide. Depressing the left side switch turns on the supra-stage light for macro and opaque objects. Built-in illuminator(s) t-1924c - there are two illuminators built into to each of the microscope bases, one is sub-stage and one is supra-stage. The ...
6 now using the x-axis knob set for split screen, one can view the left microscope specimen on the left, the right microscope specimen on the right, or roll the knob and see only the left or the right specimens. Specimen manipulation the t-1924c comes with a "floating stage". Place the specimen on t...
7 equipment rating: description of input output connection this is a 2.5 mm barrel style center pin, with a 5.5 volt, 300ma, output supply which may be used with 110v, 220v, 230v, or 240v input systems. The power supply /charger is made exclusively for the ken-a-vision cordless microscope. Failure t...
5615 raytown road • kansas city, mo 64133 u.S.A. Tel.: 816-353-4787 • fax: 816-358-5072 email: info@ken-a-vision.Com • www.Ken-a-vision.Com ins-sc81922 batteries the supplied batteries (3) type is a 1.2v 2000ma nimh (nickel metal hydride). Should you need battery replacement visit the ken-a-vision w...
