1. DL manuals
  2. Ken A Vision
  3. Microscope
  4. Dual Purpose Scope 2 T-19311C
  5. Instruction Manual

Ken A Vision Dual Purpose Scope 2 T-19311C Instruction Manual

Summary of Dual Purpose Scope 2 T-19311C

  • Page 1

    Dual purpose scope 2 instruction manual t-19311c t-19311c-230 t-19321c t-19321c-230 t-19331c t-19331c-230 t-19341c t-19341c-230

  • Page 2: Table Of Contents

    Table of contents introduction 2 packing contents 2 microscope set-up guide 3 specifications 5 troubleshooting 6.

  • Page 3: Introduction

    Introduction thank you for purchasing the dual purpose scope 2. This microscope combines the features of a standard compound microscope with limited features of a stereo microscope. This microscope features upper (incident) and lower (transmitted) led light to view opaque and transparent microorgani...

  • Page 4: Microscope Set-Up Guide

    Microscope set-up guide the dual purpose scope 2 microscope can be set up in a matter of minutes. To get the most out of this amazing teaching tool, follow these step-by-step instructions: 1. After unpacking the box, remove the dual purpose scope 2 from the plastic bag and remove the protective cove...

  • Page 5: Note:

    Note: the switch on each base is a double switch, with the middle position being off. 6. Pushing the right side of the power switch controls the bottom (transmitted) light for viewing microscopic specimens. 7. Pushing the left side of the power switch controls the upper (incident) light for viewing ...

  • Page 6: Specifications

    Specifications product number t-19311c t-19321c t-19331c stand/frame sc12 comp 2 stand with 4 hole nose piece sc12m comp 2 mechanical stage sc12dp comp 2 4 hole np w/ upper/lower light x x x standard features x x x tn e m tr a p m o c e g ar ot s re gr a h c x x x ™ el d n a h o g d n a w ot s x x x...

  • Page 7: Troubleshooting

    Troubleshooting this section provides many useful tips on how to solve common problems while setting up or using the dual purpose scope 2: i can’t see an image. I only see a partial image. • check to see if the power supply is plugged into an electrical outlet or the battery is charged if using cord...

  • Page 8

    Corporate headquarters ken-a-vision mfg. Co., inc. 5615 raytown road kansas city, mo 64133 u.S.A. Tel.: +1-816-353-4787 fax: +1-816-358-5072 cs@ken-a-vision.Com ins-sc12dp © 2011 ken-a-vision mfg. Co., inc. All rights reserved. Other trademark names may be of their prospective owners. No part of the...